Tutti i messaggi

The seller If you have questions, you can send an email for customer service help

2022-11-28 12:48:08 Utile (0)
Consegnare
risposta (1)

D: is it 32dp 48dp 64dp or module 0.8 or module 1.0 ?

Domandata da wolfman il 2018-02-23 04:03:55

xtRaymon21 All available pinions and spurgears are available 48 pitch and are es

2022-05-27 09:00:42 Utile (0)
Consegnare
risposta (2)

D: would fit on taranis x-lite? or why only for jumper?

Domandata da Aless Diaz Lopez il 2021-05-11 04:25:22

wolfman NO! Works only for jumper t-lite. It does not have the x-lite, t-lite, tango2 pin headers, but is directly wired into the t-lite mainboard. :-( You can see that in one of the pictures. HAPPYMODEL, please make a version for taranis X-lite + X9 lite !!!

2021-05-16 04:40:33 Utile (1)
Consegnare
risposta (4)

D: is it 32dp 48dp 64dp or module 0.8 or module 1.0 ?

Domandata da wolfman il 2018-05-02 05:46:57

Brottor 17T, 48DP

2021-01-24 06:08:15 Utile (0)
Consegnare
risposta (4)

wolfman Vtx 12€, osd 10€ makes DVR 8€ in your calculation ;-)

2018-07-12 01:54:03 Utile (0)
Consegnare
risposta (1)

wolfman according to TS 100 manual 12-24 Volt are recomended. Default cutoff is at 10V which you can configure down to 9V. A 3S Lipo has a voltage range between 12.6V and 9V. Technically it could work. But fun starts between 18V and 24V because the heatup time reduces dramatically at higher Voltage. E.g.: at 24V it is 11sec and at 12V it is 45sec. Better take an 4S Lipo. Be carefull with an 6s Lipo because that is >24V fully charged so it would be on your own risk.

2017-11-12 06:51:05 Utile (0)
Consegnare
risposta (3)