wolfman
- i miei contenuti
- Tutti i messaggi
- Recensioni
- Commenti
- risposta
- Domande
risposta
D: would fit on taranis x-lite? or why only for jumper?
Domandata da Aless Diaz Lopez il 2021-05-11 16:25:22
D: What's the voltage requirement? Would this operate on a lipo 3s battery (e.g. 1300 mah)?
Domandata da jkomuda il 2017-11-11 10:04:52
wolfman according to TS 100 manual 12-24 Volt are recomended. Default cutoff is at 10V which you can configure down to 9V. A 3S Lipo has a voltage range between 12.6V and 9V. Technically it could work. But fun starts between 18V and 24V because the heatup time reduces dramatically at higher Voltage. E.g.: at 24V it is 11sec and at 12V it is 45sec. Better take an 4S Lipo. Be carefull with an 6s Lipo because that is >24V fully charged so it would be on your own risk.
Utile (0)
D: Vtx 12€, osd 10€. So why buy this for more than 30€? only 500mw thats weak
Domandata da Lennson il 2018-07-04 04:10:13
wolfman Vtx 12€, osd 10€ makes DVR 8€ in your calculation ;-)
Utile (0)
wolfman NO! Works only for jumper t-lite. It does not have the x-lite, t-lite, tango2 pin headers, but is directly wired into the t-lite mainboard. :-( You can see that in one of the pictures. HAPPYMODEL, please make a version for taranis X-lite + X9 lite !!!
Utile (1)