Kris
i miei contenuti
Tutti i messaggi
Recensioni
Commenti
risposta
Domande

Tutti i messaggi

Kris 27/10/2023
Overall a decent fence, however, there are a couple of material issues as well as design issues. 1. Fence stops pieces are made of aluminium base and plastic composite stop piece. The bolt-washer combo which holds the stop piece is undersized for this stop. As a result, it bends easily even with not much force. This is a bad design in combination of a poor choice of materials. 2. The fence micro adjusters are badly designed (too small) and also they cheaped out on the connection design which is done by a bolt-plastic slot combination. It works, but it is not convienient to use and the slack in the connection is huge. I chose not to use it at all. 3. The big stop bolt system has an aluminium turn head but base is plastic. Works, but have to be careful not to break it by tightening the bolt with too much force. Aluminium base part should have been used instead.
ENJOYWOOD Wnew Tavola da fresatrice in legno con recinzione in alluminio Sistema di 700mm con staffe scorrevoli e protezione per la fresa
US$179.99 US$399.99
1
raccomandazioni
Commento (1)
Kris 09/11/2023
Quality control of packaging is bad. I ordered 12 tracks. 1 out of 12 came in without being properly packed with missing screws and end damaged because of missing the wrap package. I would give this a 3-star rating, but they would filter it out.
1 Pc 800mm T-slot T-tracks Strumento di fissaggio per tavola per router
US$19.99 US$18.99
0
raccomandazioni
Commento (1)
Kris 07/11/2023
The quality is acceptable. The packaging was a bit sloppy. Whoever packed this thing did put the loose steel bolts with a same slot with the miter gauge and it got some cosmetic damage. Otherwise its OK. The only problem I have with its functionality is that the right side is 90 degrees. That means it cant do 45 deg cuts without offseting. This can be annoying for many. I would have preffered it to be 45 deg.
Goniometro HONGDUI HD-MG21 con recinto esteso per sega da banco e tavola per fresatrice, impostazione precisa dell'angolo
US$255.99 US$399.99
0
raccomandazioni
Commento (1)
Kris 27/10/2023
Good tool. Quality as expected. Keeps its 90degree angle when tightened.
ENJOYWOOD Squadra combinata in lega di alluminio regolabile da 300 mm con angolo a 45 e 90 gradi, Goniometro e righello in acciaio per falegnameria, Strumento di misurazione fai da te per carpentiere
US$9.99 US$25.99
0
raccomandazioni
Commento (0)
Kris 27/10/2023
Good tool. Quality as expected. I little pricy, but well worth it.
Pialla per raccordo per la lavorazione del legno HONGDUI con 3 inserti in carburo di ricambio, doppia lama tagliente per il taglio rapido dei bordi del legno
US$63.99 US$99.99
0
raccomandazioni
Commento (0)
Kris 27/10/2023
Good tool. Quality as expected for the price.
Nuova sega da tavolo 3D Blocco di spinta per sega da tavolo Sicurezza del blocco di spinta per sega da tavolo per la lavorazione del legno
US$69.99 US$79.99
0
raccomandazioni
Commento (0)
Kris 26/10/2023
The price is a bit much, but the product is well made. A couple of issues when assembling. a. for some wierd reason a 10mm wrench was included. That was useless, since there is no 10mm bolts or nuts on this thing. Intead there should have been a PH3 screwdriver. b. One steel slider insert had a very bad thread and I was forced to make a new one for it. Luckily I had a right tools for it. I calibrated by making an actual cut and adjusted brackets according to the real outcome. This is a better way to get accurate calibration. When in full lenght the tool was off by 1mm at 1200mm mark. So I had to sand two outer pieces a little shorter to make it fully accurate. When all that was done, everything worked fine and the cuts were up to 0.3mm accurate for all lengths. Overall I am happy with it.
Sistema di guida parallela in lega di alluminio migliorato ENJOYWOOD per tagli ripetibili per guide per seghe a binario adatto per utensili per la lavorazione del legno Makita e Festool. Aggiornamento del gancio
US$129.99 US$199.99
0
raccomandazioni
Commento (1)
Stack Geprc Stable Pro F7 con doppio giroscopio Flight Controller da 20x20mm e ESC 4in1 BLheli_32 da 35A e VTX 5.8G da 500mW per droni RC da corsa FPV
US$162.75 US$150.00

D: The length of the m2 bolts?

Domandata da Kris il 2019-08-05 02:07:04

Alvaro Navarro puedes hablar en espanyol?

2020-02-19 12:19:56 Utile (0)
Consegnare
risposta (1)
Kris 25/07/2019
Fine props. 0.4g and work well
Happymodel Sailfly-X Pezzo di ricambio 6 coppie 65mm Elica a 2 pale con foro di montaggio da 1,5 mm per RC Drone FPV Racing
US$9.23 US$9.99
0
raccomandazioni
Commento (0)
iFlight SucceX mini F7 TwinG V3 F722 controllore di volo e 35A 2-6S DSHOT1200 ESC & pit / 25/100/200/500 VTX
US$92.69 US$101.97

D: The length of the m2 bolts?

Domandata da Kris il 2019-08-05 02:07:15

tiemfpv about 20mm

2019-08-14 10:21:35 Utile (0)
Consegnare
risposta (1)
Kris 25/07/2019
Works as advertised.
Runcam Racer Nano CMOS 700TVL 1.8mm / 2.1mm Super WDR Minori FPV fotografica 6ms Controllo della gestazione a bassa latenza OSD integrato per FPV Racer Drone
US$35.86 US$38.39
0
raccomandazioni
Commento (0)

Sei l'esperto, puoi aiutare?

Ti invitiamo sinceramente a iscriverti all'e-mail di risposta all'invito!

Se ti iscrivi, ti inviteremo via e-mail a rispondere alle domande che le persone hanno sui prodotti. Iscrivendoti] guadagnerai anche il "Badge utile "! Puoi annullare l'iscrizione in qualsiasi momento nella pagina delle impostazioni sulla privacy.

Aiuta gli altri e sii più felice!

  • sottoscrivi

Informazioni sui badge

I badge sono collegati alla community e gli utenti guadagnano badge creando contenuti di qualità, completando missioni o partecipando ad attività speciali. Le persone specifiche avranno anche il proprio badge esclusivo.
Badge CEO

il badge ceo è di proprietà solo del boss di banggood.

I badge che puoi guadagnare arriveranno presto
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe