DICKFRANKLINhsv
D: what size prop should be used?
Domandata da DICKFRANKLINhsv il 2024-05-05 02:13:43
D: Will any other transmitters work? What is the radio protocol, ie, DSMX, etc?
Domandata da DICKFRANKLINhsv il 2021-02-15 09:15:03
volki bilmiyorum
2023-04-07 12:35:27 Utile (0)
BG111254537 Yes, this is a bank and yank setup. For the elevators you will need to use two channels on your receiver. Each elevator servo should be in its own channel. Once done you will have to go into your transmitter and setup one of your elevator servos to be slaved to the other channel. That way both will move at the same time. You might have to reverse one or both servos in you transmitter as well to make sure they are moving in the correct direction. The ailerons can just use a “Y” harness and plugged into your channel 4 slot. If you want Flaperons for slower landing speed you will have to setup your ailerons like the elevators.
2022-12-10 07:11:26 Utile (1)
D: Does the LED flash whenever the buzzer sounds?
Domandata da DICKFRANKLINhsv il 2022-01-02 07:42:46
Grumpy12 Yes it does
2022-01-02 08:11:33 Utile (0)D: Does it have metal gear servos?
Domandata da DICKFRANKLINhsv il 2021-08-06 12:42:48
BG813155416 No but the servos are cheep and break easily. I've broken several while learning to fly. I keep extras on hand. But I haven't broken any in quite a while. Just don't crash and you'll be fine.
2021-08-11 01:44:02 Utile (0)
sal.fav 19.5 inches long
2021-02-06 07:54:59 Utile (1)D: What better? this product or xk x520
Domandata da yanivoz il 2019-12-24 11:50:25
DICKFRANKLINhsv It is the same plane as the JJRC M020, also with plastic gear servos for motor tilt. As noted in other answers, these servos are very likely to strip gears. Mine did that on the first transition from drone to airplane mode. Be prepared to spent another $30+ for 5g metal gear servos, and servos are not easy to replace
2021-07-15 12:27:49 Utile (1)
DICKFRANKLINhsv No, it will fly according to wind effects and probably the configuration of wings, rudder, etc. It won't go far
2021-06-19 04:24:16 Utile (0)
DICKFRANKLINhsv This "kit" is not for the novice modeler. You need to understand how RC models with electric motors and servos work.
2021-05-31 08:42:10 Utile (0)D: esse modelo, vem com o controle???
Domandata da BG710414216 il 2020-12-14 06:57:36
DICKFRANKLINhsv No. You need a (really) micro receiver and compatible transmitter.
2021-05-31 08:40:21 Utile (0)D: Where can we buy the Eachine Safe-Flight Control with GPS
Domandata da DICKFRANKLINhsv il 2021-02-20 09:18:53
Plumwas it will soon be available
2021-03-09 03:01:00 Utile (0)
Karel Lootens yes, 9g * 4 for flaps and ailerons, 25g * 2 for rudder and elevator
2021-03-01 01:27:20 Utile (0)Ti invitiamo sinceramente a iscriverti all'e-mail di risposta all'invito!
Se ti iscrivi, ti inviteremo via e-mail a rispondere alle domande che le persone hanno sui prodotti. Iscrivendoti] guadagnerai anche il "Badge utile "! Puoi annullare l'iscrizione in qualsiasi momento nella pagina delle impostazioni sulla privacy.
Aiuta gli altri e sii più felice!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
