rokhounds
D: Does the PTFE tube go all the way through to the nozzle or just into the top of the hot end??
Domandata da rokhounds il 2020-09-15 11:29:36
D: does this board actually fit the CR10 or is it the smaller board that they say fits the cr10
Domandata da rokhounds il 2021-01-30 07:16:54
Tushwas it is for CR10
2021-02-02 09:29:16 Utile (0)
D: Is this an actual all metal hotend or does the PTFE tube still go through it to the nozzle??
Domandata da rokhounds il 2020-09-15 11:24:37
BG111543834 Judging by the pictures, it is NOT an all metal hot end
2020-09-29 12:12:08 Utile (1)D: what types of filament dose this printer take?
Domandata da Chris Marlow il 2020-05-05 03:20:00
rokhounds out of the box you can print PLA, ABS & PETG... however, ABS and PETG need higher temps to print and will cause the Teflon tube to wear out extremely fast so your best bet is to upgrade to Capricorn Tubing before attempting those or you can move up to an all metal hotend and not have any issues at all. PTFE tubing melts at 250 degrees, about 10 degrees hotter than needed for PETG & ABS however on a long print job heat creep can allow the tubing to begin to degrade and the fumes from that are toxic!And when I say long I mean 3-day print jobs or longer. All in all this is a great big printer than can do so much, all you need to do is learn to work with it.
2020-09-22 04:30:48 Utile (0)
rokhounds just as there are people who will take the time to learn how to properly use the printer, there are also people who expect this to be 100% right out of the box. As with any and all budget printers, by budget I mean non-commercially intended printer, there is a learning curve between E=step calibration, bed trammeling (leveling), and the need to replace parts as they wear or upgrade to allow the printer to print different materials that may need higher temps or cause more wear on the nozzle than the basic 3... PLA, ABS, & PETG. If you tyake your time and do your research online and through the different forums out there you shouldn't have any problems. I do not own this printer however I do own the Creality Ender 3 pro and a Creality CR10S (300x300x400) so I do know what I am talking about and that is how I learned to get the most from my printers too!!
2020-09-22 04:26:16 Utile (0)
rokhounds not without upgrading the hotend to all metal to handle the higher temps needed.
2020-09-22 03:40:36 Utile (0)D: Hello, Can you prepare an invoice on my company's name instead of myself as a private person?
Domandata da Richard il 2020-07-23 12:28:25
rokhounds If you order it through a company the invoice should have the company name on it.
2020-09-22 03:39:39 Utile (0)D: 110 or 220v?
Domandata da Francis Nakazone il 2020-07-23 06:31:53
rokhounds the power supply is capable of both and requires the user to set it to the proper voltage during the assembly process.
2020-09-22 03:38:41 Utile (0)
rokhounds your best bet for printing TPU is to upgrade to a direct drive extruder with an all metal hotend. Ideally upgrading the heated bed woould be great too but not as necessary as the hotend, extruder.
2020-09-22 03:30:32 Utile (0)D: This printer works with nylon filament?
Domandata da KEPLERFM il 2018-11-07 03:52:05
rokhounds NO, anyone who says otherwise is LYING !!! In it's stock form it is not capable of printing Nylon due to the high Temps needed. To print Nylon you need an all metal hotend and a double gear extruder upgrade would not hurt either.... Ideally a direct drive upgrade would be best, the nozzle should be rated for 400 degrees and you would need a bed capable of 100 degrees. which the stock Ender 3 is not capable of doing without damaging the printer
2020-09-22 03:28:13 Utile (2)D: What are the internal dimensions?
Domandata da Matheus Melo il 2019-06-01 08:40:13
rokhounds 220 x 220 x 250mm print size.
2020-09-22 03:23:52 Utile (0)
rokhounds no, not easily, to print TPU it would be better to upgrade to direct drive as tpu can flex with the PTFE tube and ruin a print, or you could try to print at extremely slow speeds.
2020-09-22 03:04:55 Utile (0)
rokhounds the printer is 12v output.
2020-09-22 03:02:10 Utile (0)D: Can this be used on the Ender 3?
Domandata da Ozymandias123 il 2019-12-01 08:54:48
rokhounds If your ender 3 is 12v you need to reuse your old heater and thermistor to make this work as I believe the parts in this kit are 24v.
2020-09-22 11:03:49 Utile (0)Ti invitiamo sinceramente a iscriverti all'e-mail di risposta all'invito!
Se ti iscrivi, ti inviteremo via e-mail a rispondere alle domande che le persone hanno sui prodotti. Iscrivendoti] guadagnerai anche il "Badge utile "! Puoi annullare l'iscrizione in qualsiasi momento nella pagina delle impostazioni sulla privacy.
Aiuta gli altri e sii più felice!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
alexistou It can not go all the way to the nozzle. It has a Titanium heat brake! It is full metal.
2020-10-04 01:59:25 Utile (1)