stoep
i miei contenuti
Tutti i messaggi
Recensioni
Commenti
risposta
Domande

Tutti i messaggi

5V 0-1.2 MPa Sensore del Trasduttore di Pressione Sensore d'acqua Gas Gasolio
US$18.47 US$19.99

D: Is this an absolute pressure transducer? I mean, O psi means no pressure at all but not atmospheric pressure, right?

Domandata da BG131240121 il 2021-04-27 05:22:30

stoep It's a pressure sensor not a vacuum sensor. 0 means atmospheric pressure.

2021-04-27 06:26:35 Utile (0)
Consegnare
risposta (1)
stoep 11/04/2021
Mediocre performance due to lack of filtering. For the price it's reasonably good but don't expect big performance. Worth the money? Yes
Analizzatore di spettro USB LTDZ 35-4400M Geekcreit® con modulo di tracciabilità della sorgente segnale RF, strumento di analisi nel dominio delle frequenze con involucro in alluminio
US$68.99 US$67.99
0
raccomandazioni
Commento (0)
stoep 29/01/2020
Item is not as advertised. Doesn't have XHP70 LED's. It's an okay flashlight but value for price isn't good. I own several flashlaghts of less than 10 dollar that outperform this one.
XANES P70 T3U XHP70 LED 5Modes USB ricaricabile impermeabile LED Torcia 18650 Torcia 26650 Torcia
US$26.57 US$30.00
11
raccomandazioni
Commento (5)
stoep 23/02/2019
The image quality is great. Screen brightness is great. Touch screen is good. Processing is fast. Nextion editor is okay but far from good: -No subroutines -No string manipulation -Very poor interface to manage bitmaps -Not so good font creation quality, no anti aliasing option -Variable naming and usage is -so-so -No calculations possible in if / while -Serial upload of 16megabyte takes forever: use a micro SD card! -Arduino library is bloated and doesn't work with softserial. Hint: make display control your communication protocol timing (I use 50ms and 57k6 serial speed) and then you can work with softserial. Controlling nextion variables yourself isn't hard. Some issues that can all be worked around but take time. Still, a good quality product. Attached are images of two hobby projects I made with this screen. I made anti-aliased bitmaps for everything....
4.3 Pollici Nextion NX4827T043 HMI Modulo Pannello di Display Schermo LCD TFT Touch Screen Seriale UART USART Intelligente
US$79.65 US$93.64
2
raccomandazioni
Commento (1)
HP DC 12V 460W 38A Alimentazione con spina XT60U-F per ISDT Q6 SKYRC B6 Caricabatterie NANO Batteria
US$36.95 US$38.99

D: Can this use for suply amplifier 12v?

Domandata da BG124364738 il 2020-12-05 10:54:37

stoep Yes, absolutely. Besides using it to charge LiPo's, I also use it for my powered sub, and that works perfectly.

2020-12-06 02:24:40 Utile (0)
Consegnare
risposta (3)
stoep 12/10/2020
Nice product. Varies a bit from changes in barometric pressure, but very useful sensor. Was shipped very quickly.
Sensore di altitudine FlySky FS-CAT01, compatibile con porta dati I.bus per trasmettitori FS-i8 FS-i10
US$17.31 US$17.99
0
raccomandazioni
Commento (0)
stoep 12/10/2020
Have not tried the temp sensor in my airplane yet, but the senor works, shipping was fast. Nice work BG!
Modulo di raccolta temperatura Flysky FS-CTM01 per iA6B iA10
US$20.78 US$21.99
0
raccomandazioni
Commento (0)
stoep 12/10/2020
Amazing. I thought the fan would be loud, but it's actually OFF most of the time (under light loads). Good server power supply repurpose!
HP DC 12V 460W 38A Alimentazione con spina XT60U-F per ISDT Q6 SKYRC B6 Caricabatterie NANO Batteria
US$36.95 US$38.99
0
raccomandazioni
Commento (0)
stoep 14/08/2020
these little units are a must-have to monitor your LiPo in flight. Excellent!
Modulo di raccolta tensione Flysky FS-CVT01 per ricevitore iA6B iA10
US$17.24 US$18.99
0
raccomandazioni
Commento (0)
stoep 14/08/2020
I had a number of 6 channel rx-es already, and now needed an extra channel. BG is cheap and has GREAT products. This is another one of them.
Ricevitore Flysky 2.4G 10CH FS-iA10B con uscita PPM e porta iBus
US$15.99 US$32.99
0
raccomandazioni
Commento (0)
stoep 14/08/2020
A tad too much delay to my liking, not a big issue. Great value for money.
Modulo di riduzione lenta del servo sterzo in acciaio Rin G da 5-6V per modelli RC
US$9.23 US$9.59
0
raccomandazioni
Commento (0)
stoep 04/04/2020
This motor/esc combination was bought to replace a low end brushed 15T 540 size engine, for my Tamiya TA-01 Nissan Skyline GTR Nismo. This motor isn't any faster than the 15T brushed, but the efficiency is MUCH higher, and this ESC is a beauty. Braking is easy, acceleration control is just perfect and low speed regulation is also very very nice. The old brushed motor ran very hot, and this engine runs very cool. I just now did order the 4379kV motor, as I do want a bit more speed. This motor and ESC will find their way into my Tamiya M03 Mini. Very happy with this purchase. Fast shipping, good packaging, high quality. If the motor holds up for a long time, I don't know....
Motore brushless impermeabile Surpass Hobby F540 V2 3650 senza sensore con ESC da 60A per automobili Brushless RC in scala 1/8, 1/10, 1/12, 1/14 Tamiya TT-02
US$43.88 US$45.99
1
raccomandazioni
Commento (0)
stoep 12/04/2020
This battery has me TRULY AMAZED. The LiPo inside the hard case is rattling about a little bit, and this did not inspire a lot of confidence. So, I decided to DISCHARGE and then CHARGE the battery to find out it's mAh rating. I have a battery charger that I've found to be reasonably accurate in reporting charge mAh's, so I gave it a shot. During discharge I was already surprised to see more than the rated 3200mAh.... So, I set my charge rate to 3.3A and a time limit of 80 minutes on the charger. At the end, when the time limit hit, both seperate lipo cells were at 4.19 / 4.20 V, alternating, and the charge current had dropped to 500mA. Here is the mAh I was able to charge:
Batteria Lipo ZOP Power 7.4V 3200mAh 45C 2S con spina T per auto RC
US$32.33 US$33.99
0
raccomandazioni
Commento (0)
stoep 04/04/2020
Works as intended, very easy operation.
Programma LED Racerstar per Racerstar Surpass Rocket ESC
US$15.00 US$15.99
0
raccomandazioni
Commento (0)
stoep 10/01/2020
These cars are great fun. The design of the "chassis" is brilliant with a flexing point and a spring. Very nice. Steering is not proportional just straight forward, or left, or right. Steering can be finetuned at the underside, (left right) so it will go straight. The speed control is proportional and works great. It outperforms my vacuum cleaner in picking up hairs (under sofa's) from the floor, so frequent hair removal from all 4 axles is needed :) Great fun, good cars, I like them!
Banggood 1/32 2.4G Racing Multilayer in Parallel Operazione di Ricarica USB Formula RC Car Indoor Toys
US$18.89 US$21.99
0
raccomandazioni
Commento (0)
stoep 21/02/2019
Nice product at a good price. Needs some oiling but works fine.
Tre Mandrini di Tornio a Mandibola M12 * 1 Mandrino 45mm per Mini 6 in 1 Tornio
US$42.72 US$44.99
0
raccomandazioni
Commento (0)
stoep 11/10/2018
The unit is exactly as advertised, and it works extremely well. Needs 3 x AAA battery, doesn't run on LiPo voltage (too low) but that is just a minor issue. Also no way to store an image (no SD card) but also minor issue. Again, as advertised, and I'm really thrilled to have a thermal camera at this pricepoint.
Termocamera a infrarossi HT-175 fotografica Termocamera digitale -20 ~ 300 ℃
US$136.99 US$191.99
2
raccomandazioni
Commento (1)
stoep 03/10/2018
Today the kit arrived. The box it is in is a simple one, but effective. It made me wonder about the quality of the ratchet crimping tool itself. To my surprise this is a high quality product and feels very solid. Owning a tool from AMP (to crimp BNC connectors) I do know what A-brand product feels like. This isn't far behind. I really like it. Also like all the different inserts it comes with. I immediately crimped a few connectors and yes it's really good. Recommended!
Paron® JX-D5 Crimpatrice a Cricchetto Multifunzionale Utensile Troncatrici Terminali Kit Pinze
US$42.72 US$44.99
0
raccomandazioni
Commento (0)
stoep 28/05/2018
Even though the text clearly says it ships with a US power cord, the image shows a European power cord. So that gives a wrong impression. A lot of people don't read. I saw it and for me it's no issue as I have many suitable power cords. But do please change the image. Then the charger itself. It boasts a CE marking but close inspection revealed insufficient distance between AC and 'user touchable' DC side. There is a slot in the board, which is perfect, but it ends too soon, leaving a 2mm distance between solder joints on primary AC side and user touchable DC side. No way it passes CE requirements. The electronic design itself looks okay at first glance. It even has a fuse. So I am not too worried regarding 'fire hazard' situations. Value for price and quality are so-so as far as I am concerned. I don't want to zap myself, please! It seems the board does have sufficient room so a slight reallocation of the switcher controller would already help mitigate the issue. I will use the charger, but only on 12VDC.
Caricabatterie LiitoKala Sii-260 I2 Smart 18650 26650 per batterie Li-ion/Ni-MH/Ni-CD
US$17.31 US$17.99
3
raccomandazioni
Commento (0)

Sei l'esperto, puoi aiutare?

Ti invitiamo sinceramente a iscriverti all'e-mail di risposta all'invito!

Se ti iscrivi, ti inviteremo via e-mail a rispondere alle domande che le persone hanno sui prodotti. Iscrivendoti] guadagnerai anche il "Badge utile "! Puoi annullare l'iscrizione in qualsiasi momento nella pagina delle impostazioni sulla privacy.

Aiuta gli altri e sii più felice!

  • sottoscrivi

Informazioni sui badge

I badge sono collegati alla community e gli utenti guadagnano badge creando contenuti di qualità, completando missioni o partecipando ad attività speciali. Le persone specifiche avranno anche il proprio badge esclusivo.
Badge CEO

il badge ceo è di proprietà solo del boss di banggood.

I badge che puoi guadagnare arriveranno presto
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe