bambibula
D: how much Ampere esc cao use
Domandata da BG571710105 il 2022-02-15 11:16:02
bambibula I am running the motor on 2S batteries and a 5x4 prop, and the maximum static AMP draw is under 7 AMP, while the average AMP draw in flight is 2-3A. For my setup I use 10A - 20A ESCs. If you are using 3S batteries, and-or larger props, then go for a 20A ESC.
2022-02-16 11:00:07 Utile (1)
D: what battery do u use for it?
Domandata da BG383315543 il 2021-10-07 01:57:03
bambibula I am planning to use the camera on a fixed wing model. I have tested it on the ground with power from the receiver, and it works fine. This means, I have attached a servo plug to the camera for power. I use an additional capacitor, which is also plugged into the receiver, to smooth the power supply.
2021-10-07 02:08:40 Utile (0)D: Hi, does this bike have a twist throttle? Also what sort can it do on throttle alone?
Domandata da Andrew il 2021-08-19 09:38:29
bambibula It does have a twist throttle, and will reach about 25 km h with it. This can be increased, and the instructions how to do that are on the manufacturer's website. We have not changed the setting.
2021-08-19 09:47:57 Utile (1)D: Hi, is the battery removable for charging indoors?
Domandata da BG541135224 il 2021-06-29 11:02:33
bambibula No. The battery is fixed by screws and cannot be removed without tools.
2021-06-29 12:42:10 Utile (1)
bambibula Thepins are separate, as in the picture and if you wish to plug in servos, the pins need to be soldered to the circuit board.
2021-06-07 08:31:50 Utile (0)D: which one of these motors is recommended for counter clockwise rotation?
Domandata da BG413753950 il 2021-04-09 10:10:23
bambibula The direction of the rotation (CW or CCW) refers to the direction in which you twist the prop-nut (the spinner) to lock it. The propeller then turns in the opposite direction, to keep the nut closed. If you take the motor with the silver spinner (CW) then the prop spins counter clockwise, which is the traditional direction for a motor that is mounted in the nose of an airplane. You can use the CW motor in a pusher configuration, if you turn around the prop. If you lose the spinner, a motor that locks its prop-nut clockwise (CW), merely requires a normal M5 nut (any nut, from any bolt), and you do not need to purchase a special nut with a reverse thread. That's why I buy the CW version, also for pushers.
2021-04-09 10:35:00 Utile (6)
D: What is the thread size for the prop mount?
Domandata da JeanLafete il 2020-04-24 06:37:46
bambibula It is M5 (5 mm)
2020-04-24 10:24:03 Utile (0)
D: can it be programmed via throttle?
Domandata da romanjasen il 2019-09-30 05:43:19
bambibula The packet contains instructions, including how to use the throttle to calibrate the ESC and to set the brake. The other settings require a programming card.
2020-01-02 10:53:23 Utile (2)
Ti invitiamo sinceramente a iscriverti all'e-mail di risposta all'invito!
Se ti iscrivi, ti inviteremo via e-mail a rispondere alle domande che le persone hanno sui prodotti. Iscrivendoti] guadagnerai anche il "Badge utile "! Puoi annullare l'iscrizione in qualsiasi momento nella pagina delle impostazioni sulla privacy.
Aiuta gli altri e sii più felice!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
