marinflorin
i miei contenuti
Tutti i messaggi
Recensioni
Commenti
risposta
Domande

Tutti i messaggi

marinflorin 25/09/2020
excelent price for the whole package (basic cnc electronics all included, only thing still needed are the endstops)
Kit scheda Geekcreit CNC Shield UNO-R3 con 4 driver A4988 e dissipatore di calore per incisore e stampante 3D
US$22.90 US$22.99
0
raccomandazioni
Commento (0)
marinflorin 24/09/2020
Item arrived in good condition. The way i see it, this is an excelent upgrade for the "rep rap ful graphics controller" LCD12864. i would definately go for something better on a new and modern printer but for the older ones, this is a great upgrade adding usb printing to old printers Works with whatever board has the 2 ribbon conectors + 1 serial connector(if you want the touch and usb printing functionality). On older boarrds including ramps, the reset pin (on the black serial cable)will be left loose when installing. + Works with at mega + ramps dual mode - LCD12864 simulation works just fine USB printing in touch screen mode (also has the familair SD card but who needs SD when you have usb support? ) very good price - the touch screen is inferiour to the tft35 series, sometimes multiple clicks are required, finger must be angled at precisely 90 deg when clicking or touchscreen might not pick it up all of the cables are extremely short ~20cm max. They are far too short for my printer, and most lkely for every printer that does not have the display installed directly over the motherboard. If you are uppgrading an old LCD12864, only a longer serial cable will be required, as the 2 ribbon cables can be reused marlin 2.x has issues compiling on windows machines when using the library that this requires (U8). Workarounds are using 1.9x versions of marlin or compiling in ubuntu.
BIGTREETECH® TFT24 V1.1 GD Touch Screen Display Compatibile 12864LCD Parti della stampante 3D VS TFT2.4 Per SKR PRO SKR V1.3 Ender-3
US$34.64 US$36.99
0
raccomandazioni
Commento (0)
marinflorin 16/07/2020
came in as advertised, not damaged, in good condition
2 pezzi Cuscinetto a sfera a flangia a blocco a cuscino in lega di zinco KFL08 con foro di diametro 8 mm KFL Bearing
US$9.23 US$9.99
0
raccomandazioni
Commento (0)
marinflorin 16/07/2020
nice quality nuts, way better than the smaller (and cheaper) ones available.
Machifit 50Pz 20M3 D Dado Scorrevole T M3 Dado a T per Profilo in Alluminio 2020
US$12.99 US$15.99
0
raccomandazioni
Commento (0)
marinflorin 22/06/2020
arrived undamaged, as expected 0.2-0.4 mmm tollerance, i pulled and measured one of them, not too good and not too bad either decent overall
Machifit LM12UU 12mm Cuscinetto Lineare a Sfere Sigillato con Gomma e Protetto da Schermo Cuscinetto Lineare
US$2.75 US$7.99
0
raccomandazioni
Commento (0)
marinflorin 22/06/2020
arrived as advertised, nothing speial about the packaging but they were handled with care, no dents or damages Quality wise, there's no play or backlash at all, feels to be decent quality Needs greasing!! quite noisy out of the box(well .. out of the bag), also helps with smoothing out the movement. Very important, as myself, i forgot about this detail. The rail is held in palce using M3 screws, so if you're using it on a 20 x XX profile like i am, it requires M3 bolts + M3 sliding nuts (T nuts) - separate things, they add to the price quite a lot, 500mm rail has around 20 holes, so 20 bolts + 20 nuts if we were to use all of the holes for maximum stability. I suppose you can get away with just 10bolts+nuts/500mm of rail if it is beeing used on a 3d-printer, where the stresses would be smaller than a CNC Blocks also use M3 bolts (for whomever is concerned)
Guida lineare Machifit MGN12 da 100-1000 mm con blocco di guida lineare MGN12H Pezzi CNC
US$13.79 US$17.99
0
raccomandazioni
Commento (0)
marinflorin 22/06/2020
decent quality need cleaning and greasing before using !! After cleaning and greasing they move smoothely with close to no noise, No play at all in any direction - Thumbs up
Blocco di guida lineare Machifit MGN12H in acciaio con cuscinetto da 12 mm per macchine CNC di precisione e costruzione resistente
US$7.99 US$15.99
0
raccomandazioni
Commento (0)
marinflorin 22/06/2020
best sliding nuts i ever used so far, way better than the "slim" cheaper ones decent price for the quality
Drillpro 50 pezzi M5 Dado scorrevole a T in acciaio al carbonio zincato Dado scorrevole a T per profilo in alluminio 2020
US$10.99 US$13.99
0
raccomandazioni
Commento (0)
marinflorin 22/06/2020
arrived as ordered
Accoppiamento albero flessibile in alluminio da 5 mm x 8 mm OD19 mm x L25 mm Connettore accoppiatore motore CNC
US$11.54 US$11.99
0
raccomandazioni
Commento (0)
marinflorin 22/06/2020
Arrived in great shape. Each lead screw was packed in it's individual plastic tube. The "straightest" lead screws i ever ordered. I'm very pelased with them P.S. - antibacklash nuts require reinstalling, they are on the rod already but do not pair, need to be taken off and reinstalled, easy enough job Less than 2 weeks delivery to RO,and package was not bent or dented at all, the couriers handled it with care. thumbs up
T8 100/200/300/400/600mm 8mm Vite con Dodo Antiribaltamento
US$6.86 US$11.36
0
raccomandazioni
Commento (0)
marinflorin 20/06/2020
arrived as advertised and in good condition. tested it and it works. Did not install it on a machine yet, just wanted to see everything was ok out of the box. It is more silent than expected. motor wiring doesn't inspire much confidence though, seems thin to me ... It's powered at the plug (220v) but has no ground on the psu connection... did not notice before ordering, not sure if normal/safe real tests after i get to run it 4 stars for quality mostly because of the price, first impresion thumbs up for shipping, it was fast and the goods were not damaged at all
Motore Mandrino Machifit ER11 CNC 500W con Morsetti da 52mm e Alimentatore di Regolazione della Velocità
US$83.99 US$99.99
0
raccomandazioni
Commento (0)
Motore passo-passo Nema17 da 59Ncm, 2A, 1.8° con 4 fili e 48mm di lunghezza per stampanti 3D e CNC
US$16.16 US$20.99

D: hi could send witch colour cable have a+ a- b+b-?

Domandata da palicowie il 2020-06-10 09:17:38

marinflorin motorside , 6 pin connector, plastic safety bump facing up : red -blank - green -blue-blank - black

2020-06-20 12:44:49 Utile (0)
Consegnare
risposta (1)
marinflorin 17/06/2020
arrived in surprisingly good condition, no dents no scratches. Honestly, it looks and feels a lot better than the 2040 profile i sourced locally. Thumbs up, will be ordering more soon
Machifit 100-1200mm Argento 2040 V-Slot profilo in alluminio telaio per estrusione per utensili CNC fai da te
US$12.69 US$13.99
0
raccomandazioni
Commento (0)

Sei l'esperto, puoi aiutare?

Ti invitiamo sinceramente a iscriverti all'e-mail di risposta all'invito!

Se ti iscrivi, ti inviteremo via e-mail a rispondere alle domande che le persone hanno sui prodotti. Iscrivendoti] guadagnerai anche il "Badge utile "! Puoi annullare l'iscrizione in qualsiasi momento nella pagina delle impostazioni sulla privacy.

Aiuta gli altri e sii più felice!

  • sottoscrivi

Informazioni sui badge

I badge sono collegati alla community e gli utenti guadagnano badge creando contenuti di qualità, completando missioni o partecipando ad attività speciali. Le persone specifiche avranno anche il proprio badge esclusivo.
Badge CEO

il badge ceo è di proprietà solo del boss di banggood.

I badge che puoi guadagnare arriveranno presto
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe