Le migliori offerte per Sonicmodell AR Wing Pro,Plugin ISDT BattAir,servo da 2g - Banggood Italy Shopping online

:

Download the

Banggood App

Scarica l'app per ottenere

3 dollari USA buono sconto

Spedire a:

Lingua:

Valuta:

Ciao Accedi Partecipare
Accedi Unisciti a noi
Nuovo cliente? Comincia qui.
0

Hobbyboy

i miei contenuti: Tutti i messaggi; Recensioni; Commenti; risposta; Domande

Tutti i messaggi

Hobbyboy 18/03/2021

ok, so this just showed up, shipping was some what on time took a few days over a week. I must say assembly is super simple and the plans could be better as ever step is not shown so some guessing is needed. I got the unit with power system as it was the only one available. You can have this bird assembled in about and hour or so, but if your adding in a Fc then you'll be on the bench for a couple more hours. This unit came with a legit sunnysky motor, 40a SM esc, and some metal gear servo's which appear to be in the 9-12g range. If your planing on installing your fc in the rear bay you will need to swap out the stock esc, it's big, and the gps housing is directly above it keep this in mind when mapping out electronics. This bird has enough space for a dual video system as it has 2 pockets on each wing half, and 2 more inner pockets on the fuse, plenty of room and separation. Comes with x2 nose pieces for your choice of video system. one is made for the Dji fpv system and like the Ar900 has a outer location for another camera, it's just on the left side of the fuse. All in all this is a well planned out bird that should provide hrs of fpv fun. This is not a first timer wing unless you install a copilot system!! Even with a 4200 4S pack weight is still needed to hit cg keep this in mind also as the only place to shave weight is remove the stock set up or just the esc!!

Sonicmodell AR Wing Pro Apertura alare di 1000mm Ala volante in EPP Aeromobile RC KIT/PNP

18

Commento (8)

Hobbyboy 22/01/2026

These little Do-hickies work great! This will be valuable at the field for sure. plugged in a battery, typed in cell count, c rating , and capacity. Reads the battery perfectly. I believe it save the profile as well. My only dislike, the little clip at the back breaks easily

ISDT 2S 3S 4S 5S 6S BattAir Plugin Verifica tensione Bluetooth APP Smart Plug per batterie LiFe/LiPo/LiHv/ULiHv

0

Commento (0)

Hobbyboy 22/01/2026

Bought these for a project im working on. They look like spektrum for sure. Let's see how well they preform. One says left, the other right. let's hope the work in reverse of each other, and not move in the same direction

Mini Servocomando Lineare Digitale da 2g con Spina JST da 1mm per Aeroplano RC ad Ala Fissa

0

Commento (0)

Hobbyboy 25/07/2024

whoo- hoo, it arrived today! I mite also say in a perfect uncrushable box from China. First, let me say I like it a lot, and it can fly with a 2s pack. The fuse and wing are epp, and it looks good for the price. The brushless motor is a plus, which is why I don't buy umx planes. OK, likes: seems easy to assemble, and the Tundra tires are sweet, which lends to the bush plane look. Hopefully, some "Floats" will be made for this little guy. It looks like it's ready for water take-offs and landings. Dislikes: That AIO board! I would love to see a separate esc and standard servo plugs! I have plenty of rx laying around. which would be perfect for this little guy! 150m isn't bad, but having the ability to go beyond that would make it better. I would also like to see "Flaps". Nothing says bushplane like flaps and tundra tires. Why not make a hop up wing with flaps and floats, which I'm sure everyone would buy.

QIDI-560 A560 Maule M7 apertura alare di 510 mm 2.4GHz 4CH con giroscopio a 6 assi,acrobazie 3D/6G selezionabili con un solo tasto,acrobazie 3D,aereo RC EPP RTF compatibile con segnale S-BUS DSM

2

Commento (0)

Hobbyboy 13/07/2022

I bought this to use on my goggles. Works on both anolog and HD. First the up side! This is a decent power solution for anolog goggles as the 2s 18650 cells last. The charge port makes it even better, but takes for ever so keep that in mind. The little door makes it easy to swap out cells once you need too. Out in the field I doubt anyone is going to hook this up to a usb port and charge the cells. The fly day would be over before these would be done. Down side as you know 2s packs don't last long on HD goggles, not like a 3s or 4s pack would. A boost is needed inline so the output power can be boosted to 9v. I have not test these yet to actually see how long it would last. I have used DIY 2s li-ion packs and have gotten a few good flights before the battery icon starts flashing. I hope some can pass this on to Eachine so they can make a unit that will hold small li-ion like the 18350 cells. I'm going to try and figure out Amp draw of my Dji goggles and try and source a step up vreg and see if that gets longer times in-between charges. But a 3s version would be smashing! Oh and don't use the button top 18650, all the reviews say the button tops make it hard to close the door.

Ogni custodia per batteria a cella Li-ion 18650 7.4V DC 5.5mmx2.1mm con caricabatterie USB integrato per EV200D EV300D EV300O DJI Fatshark Skyzone occhiali FPV

US$15.99 US$28.49

2

Commento (0)

Hobbyboy 26/12/2025

I bought this little guy to go with a Micro Aces kit I purchased. I had totally forgotten I purchased the kit. while cleaning up the shop, I found the box. So I ordered this little guy for control. I like it because its small and lightweight. I don't like the fact that it came with a connector already connected to esc, but no mating connector to solder to motor wires. I also changed the length of the jst power cable as it was way to short for any real use. Other than that I love that it has a channels. one channel can be used as a dual aileron port by jumping a pad while powering on the unit, which will make this even more user friendly. This is Definitely worth the price. I did put letters on the plugs on the board just to make things easier when final set comes around.

Mini Ricevitore AEORC RX148-E/RX148-TE/RX158-E/RX158-TE/RX448 S-FHSS DSMX/2 FRSKY-D16 ACCST-D16 Flysky AFHDA-2A Integrato con ESC Brushless

0

Commento (0)

Hobbyboy 26/12/2025

This is my 3rd purchase of this rx/esc unit. works great and has potential to be used in some micro twin planes.

Ricevitore multi-protocollo a lungo raggio con ESC Brushless duali da 12A integrati con BEC per trasmettitore radio Flysky i6 i6X Wfly Microzone Radiomaster 4in1

US$13.79 US$29.99

0

Commento (0)

Accessori e parti di ricambio per aeroplani RC QIDI-550 SWIFT-ONE Sky Challenger 505mm: servo ala, servo timone, servo elevatore

D: whats the connector size 1.00, 1.05, 1.25?

Domandata da Hobbyboy il 2025-12-22 04:56:12

The seller 1.25

2025-12-23 09:15:16 Utile

Consegnare

risposta (1)

Hobbyboy 15/12/2025

This plane rocks, so far. First thing i did was assemble it, and it was easy enough, no guessing needed. main wings click in! the horizontal stab/elevator slides in and gets screwed into the fuse. This is the plug N play version but its missing the rudder servo. Not sure it was included, but should've been added! Likes: ease of assembly everything is straight-forward no guessing and no glue needed. looks like fvp system can be mounted directly in the nose, which is good for HD guys. Anolog video shouldn't be an issue either. misses: No rudder servo included! servo cables are super long especially the elevator servo. Like all Heewing birds this one has a pdb inside which excepts the motor/esc cables which have plugs ends for a secure connection. The servo plugs, plug directly into rx. aswell as the main power/signal cable which will control both motors. In closing this little bird mite go down in 250g history as a solid little twin. Shipping took longer than 7days which i was happy about! do better Banggood!

Hee wing H1 Humi 680mm di apertura alare Doppio Motore EPP FPV RC Aereo PNP

0

Commento (0)

Hobbyboy 06/12/2025

This appears to be the GP Seawind. This sea plane should assemble easily even without a manual. Comes with wood pieces that need to be glued into certain spots on the fuselage. Main wing is removable into halves. They are held in place with a single bolt on each wing half. It appears one cf square spar was missing from contents of box. I'm assuming because motor box has a square hole in the back portion of the box. A slot for the spar is also present. One spar that was in the box, I cut a portion off to mount to box. The square spar has a hole in center and a 6mm spar fits nicely inside. This should stiffen the area behind the motor. With out it foam is somewhat flexible! The rest of the build is straightforward which involves servos, esc and motor mounting. You're gonna need 3 lengths of wire about 5-8" long. These will get connected to the motor wires, and allow esc to me mounted mid fuse. You'll need servo extension aswell. Water proof glue is needed for completion

KPQRC Ruilav Caccia Marittimo Terreno Aereo 900 mm di apertura alare 6CH senza spazzole completamente impermeabile Aereo RC idrovolante KIT/PNP

1

Commento (1)

Hobbyboy 02/12/2025

This is my second one of these little units. First one i bought had a bad esc, because only one esc worked. I waited to long to test it out. This showed up today and I quickly soldered motors on, and power cable. It bound right away and both motors spin up just fine. These little units are perfect for umx type aircraft. Going to buy a few more for sure

Ricevitore multi-protocollo a lungo raggio con ESC Brushless duali da 12A integrati con BEC per trasmettitore radio Flysky i6 i6X Wfly Microzone Radiomaster 4in1

US$13.79 US$29.99

0

Commento (0)

Hobbyboy 30/11/2025

item showed up in two days! Wasn't expecting it for a few more days. Everything inside box looks to be undamaged. Very little in the way of packing material as you can see from the picture

1026mm Apertura alare Freewing Alula Delta FPV Flywing Aereo RC KIT

US$79.34 US$95.62

0

Commento (0)

Dancing Wings Hobby E30 PITTS Apertura alare di 450 mm PP Spugna Magica Scheda Mini Aereo Radiocomandato Indoor Biplano KIT / KIT+Combo di alimentazione

D: any suggestions on what receiver to use? I got a radiomaster tx*****in1.

Domandata da BG531024391 il 2024-11-17 09:33:37

Hobbyboy Ma-4Rx6. something like that! Made by crossoverRc and its small, has 6a brushless esc and 4ch.

2025-11-18 06:23:33 Utile

Consegnare

risposta (1)

Ricevitore multi-protocollo a lungo raggio con ESC Brushless duali da 12A integrati con BEC per trasmettitore radio Flysky i6 i6X Wfly Microzone Radiomaster 4in1

US$13.79 US$29.99

D: plz provide us manual. is this flight controller with esc and reciever?

Domandata da BG444845725 il 2024-09-20 05:23:13

Hobbyboy This is not a flight controller! it is a 5ch. rx with x2 12a esc.

2025-11-18 06:21:16 Utile

Consegnare

risposta (1)

Hobbyboy 26/05/2022

This little guy is slightly bigger than a 20x20 fc. You have to power it with 5v and it's super easy to do. You can use the 5vbec on any standard esc. For opto esc a separate bec will be required. I wired in a mamba 5v/9v bec because it's small, and I kept it in line with the esc so it's neat. I soldered a xt60 with a cap. The only miss I could find other than no documentation was the 5v power! You'd think they would have it so you can power direct voltage. I haven't used it yet but plan on putting this in something soon. In the picture you will see how I wired in my 5vbec and connected it to the board. If your trying to figure out the Batt/ Esc situation, it looks like that is kept separate from the rest of the board. Almost like a pdb but only dealing with the battery and esc that's it. Thanks BG for the fast delivery!!

Controllore di volo Lefei Sparrow 2-OSD con stabilizzazione del giro Ritorno a casa Supporto SBUS PPM PWM IBUS CRSF per aeroplano RC

US$38.99 US$58.49

3

Commento (1)

Hobbyboy 21/06/2023

After watching tracking for a few days. I got fed up because the package stopped moving, or should I say the tracking did. Needless to say, it's a pain that tracking doesn't follow the package all the way. So let me say this, it's cute! Nice size little wing, and I'm hoping performance exceeds its sleek look. Assembly is straightforward, and soldering is easy when you have a huge bay like this to work with. Remember to make everything easily disconnectable from the fc if you use one. It's small enough that you don't need one. The only glue I used were on the winglets, and it would be nice if they too were removable. I like the channels molded in the wing halves. Makes running cable and servo leads a "Snap! So far, this wing hasn't missed a beat. Has everything you need for good separation of the vtx with the pockets out on the wing. a hole for passing the antenna through would have been nice, but I'm not complaining at all. If you have all your parts, you can be up in the air in a few hours. Seriously, it's a breeze to get everything in and set up. Other than not having a place for the gps, I like it a lot! The only real head scratcher I could find was Elevon's. You will notice a gap that shouldn't be! Every other SonicModels plane has a molded in hinge line, no gaps. This little guy does, and I'm hoping some black packaging tape will work, as the elevon LE isn't beveled. That's it, nothing more I can say until I have maiden it successfully.

Sonicmodell Baby AR Wing Pro 682mm FPV Aliante RC (KIT/PNP) Struttura in Schiuma EPP con Ali Staccabili per un Facile Trasporto

6

Commento (0)

QIDI-560 A560 Maule M7 apertura alare di 510 mm 2.4GHz 4CH con giroscopio a 6 assi,acrobazie 3D/6G selezionabili con un solo tasto,acrobazie 3D,aereo RC EPP RTF compatibile con segnale S-BUS DSM

D: does anyone know the protocal for this? Can I use RadioMaster T16 multi-protocal tx, or will I need an sbus rx?

Domandata da Hobbyboy il 2024-07-25 03:32:28

tucan Use the FX-560 protocol, works fine for me!

2025-04-07 05:02:20 Utile (1)

Consegnare

risposta (2)

Hobbyboy 11/01/2025

Dancing wings Pitts bi-plane indoor flat foamy kit was super easy to assemble and straight forward. Hits: super easy assembly, full gear package minus electronics. Fuse comes in three pieces, a left printed side, and a center section where it's just the canopy that's painted. The right side is a mirror of the left, and you simply glue it together. My trick for the wings, spread the slot apart, run a glue line from tip to tip. Smash the sides together to spread the glue. Then slide your spar in place. I add weight on top to keep things nice and flat. Miss: The fuse center section should have a few slots for fc stiffener. The glue sides on. The fuse has some flex to it. Other than that i like how easy it is to assemble.

Dancing Wings Hobby E30 PITTS Apertura alare di 450 mm PP Spugna Magica Scheda Mini Aereo Radiocomandato Indoor Biplano KIT / KIT+Combo di alimentazione

0

Commento (0)

Hobbyboy 12/01/2025

Bought x2 of these for my granddaughters. they love them. It's very simple to assemble and disassembles just as easy. I only have one problem, the plastic piece used as a retainer has come loose. So before assembly check all the parts for loose fitting connection.

Super cool microfono a 5 luci con supporto canzoni karaoke strumento musicale giocattoli per bambini

0

Commento (0)

Hobbyboy 11/01/2025

Haven't used it yet will update

Ricevitore multi-protocollo a lungo raggio con ESC Brushless duali da 12A integrati con BEC per trasmettitore radio Flysky i6 i6X Wfly Microzone Radiomaster 4in1

US$13.79 US$29.99

0

Commento (0)