risposta

watageek You cannot use it to feed the motor, the purpose of a step down is to lower the input voltage to, example, 5volt to a flight controller or to feed 12 volt LED from a 4S-5S lipo. You could ( not saying you should) isolate the flight controller and use 3S on the lizard95. ESC/motor may burn.

Utile (0)
Consegnare
risposta (7)

D: Whichwireis for what? Black is for Ground and what is with orange and grey?

Domandata da dominic.e135 il 2019-03-27 21:56:43

watageek Grey is signal and orange is 3.3v input

Utile (1)
Consegnare
risposta (1)

watageek Most of the time, yes on any free UART. Keep in mind there is sometime inverter transistor. Select corresponding UART in configurator for serial_RX.

Utile (0)
Consegnare
risposta (1)

watageek Lite and normal support dshot300 max Bb1 chip 6g average. Lite_S (9g) and V2 (6g) are BB2 chip support dshot600 max.

Utile (1)
Consegnare
risposta (2)

watageek ... but 693 should be 8mm od x 4mm thick x 3mm id. Not 8x3x3. This is not 693?

Utile (0)
Consegnare
risposta (3)