GRC71
- i miei contenuti
- Tutti i messaggi
- Recensioni
- Commenti
- risposta
- Domande
risposta
D: My switch randomly turns on and off. Is there a way to stop this?
Domandata da BG155642218 il 2020-08-16 00:08:52
D: cuál es la diferencia de 1,2 o 3 baterías?
Domandata da BG161644419 il 2020-07-11 00:59:26
GRC71 You can fly the quadcopter for longer, changing the battery as soon as it runs out.
Utile (0)
D: Can the double version work with 5V at 400mA? Not experienced with 2-6s meaning
Domandata da juliangliniecki il 2020-04-08 16:19:29
GRC71 According to the specs, it won't work with 5V, as the minimum voltage you have to provide for the double strobes version, it's 7.4V (2S). 3S 11.1V 4S 14.8V 5S 18.5V 6S 22.2V
Utile (0)D: It is works in my car with 12 v battery?
Domandata da stamatis il 2017-12-15 03:16:59
GRC71 You can use 12V ONLY with the version that uses 2 strobe lights.
Utile (0)
D: How much volt is this?? 5v or 3.3v
Domandata da BG443717559 il 2020-04-17 08:37:28
GRC71 To power the Arduino Nano you can to plug it to the USB of your PC-Laptop (5V) using the serial cable. You still have though, the option of powering it using the 5V pin, using a voltage regulator (voltage has to be accurate). If you use the Vin port, you can use up to 12V to power it, but this is the last efficient way, as you dissipate through heat the excess of voltage. Regarding the output you have also the 3.3V pin. I hope it's helpful.
Utile (0)
GRC71 Yep!Please watch my YouTube video, about the launch of my Rocket Drone, filmed using the Hawkeye Firefly. The quality is not great, but the camera does the job. RC Lover san
Utile (0)
D: Which firmware is on the module by default? Is it the standard AT firmware or NodeMCU or...?
Domandata da BlueBull696 il 2020-02-21 15:33:37
GRC71 StandardAT Firmware.
Utile (1)
GRC71 Theremay be some interferences (including magnetic fields), or bad connectors. How do you power it? Using the power supply, or batteries. If you are using the second option, be sure the batteries are fully charged otherwise the relay lock itself, once the voltage it's too low.
Utile (0)