Recensioni Modulo di ricarica batteria al litio USB versione 3.2V/3.7V/4.2V con funzione protettiva

Modulo di ricarica batteria al litio USB versione 3.2V/3.7V/4.2V con funzione protettiva

US$5.99
~~US$7.99~~
Acquista ora

Recensioni clienti

4.96 su 5

Scrivi una recensione Ottieni punti doppi di Banggood se sei uno tra i primi 3 clienti ad aver pubblicato una recensione del prodotto.

Tutte le recensioni (93)
Immagine (12)
Video (0)
Tutte le stelle
- Tutte le stelle(93)
- 5 Inizia(89)
- 4 Inizia(4)
- 3 Inizia(0)
- 2 Inizia(0)
- 1 Inizia(0)

Ordina per:

Recensione Top

Recensione Top
Il più utile
Più Recente

Recensioni solo dal tuo paese (Italy)

Spettacolo originale

Una parte della recensione è stata tradotta automaticamente.

bodoo69VIP3
RO
23/07/2018

1 OUT + This pins outputs the positive voltage from battery. It should be connected to the circuit which has to be powered by the battery 2 B + Outputs positive voltage from USB cable to charge to battery. It should be connected to the positive of the battery 3 B - Outputs negative voltage from USB cable for charging battery. It should be connected to negative of the battery 4 OUT - This pin outputs negative voltage from battery. It should be connected to the ground of circuit which has to be powered by the battery 5 IN + Should provide +5V can be used if charge cable not available 6 IN - Should provide ground of the +5V supply can be used if charge cable not available 7 LED Red This LED turns on while the battery is charging 8 LED Green This LED turns on after the battery is fully charged

1 OUT + This pins outputs the positive voltage from battery. It should be connected to the circuit which has to be powered by the battery 2 B + Outputs positive voltage from USB cable to charge to battery. It should be connected to the positive of the battery 3 B - Outputs negative voltage from USB cable for charging battery. It should be connected to negative of the battery 4 OUT - This pin outputs negative voltage from battery. It should be connected to the ground of circuit which has to be powered by the battery 5 IN + Should provide +5V can be used if charge cable not available 6 IN - Should provide ground of the +5V supply can be used if charge cable not available 7 LED Red This LED turns on while the battery is charging 8 LED Green This LED turns on after the battery is fully charged

1 OUT + This pins outputs the positive voltage from battery. It should be connected to the circuit which has to be powered by the battery 2 B + Outputs positive voltage from USB cable to charge to battery. It should be connected to the positive of the battery 3 B - Outputs negative voltage from USB cable for charging battery. It should be connected to negative of the battery 4 OUT - This pin outputs negative voltage from battery. It should be connected to the ground of circuit which has to be powered by the battery 5 IN + Should provide +5V can be used if charge cable not available 6 IN - Should provide ground of the +5V supply can be used if charge cable not available 7 LED Red This LED turns on while the battery is charging 8 LED Green This LED turns on after the battery is fully charged
3

Commento

Spettacolo originale
SbvosetaVIP1
IN
20/07/2019

Good

Good

Good
1

Commento

Spettacolo originale