Recensioni Scheda di protezione Seiko IC 10A per batteria 18650 Lipo 3S 11.1V 12V 12.6V - Banggood Shopping online Italia

:

Download the

Banggood App

Scarica l'app per ottenere

3 dollari USA buono sconto

Spedire a:

Lingua:

Valuta:

Ciao Accedi Partecipare
Accedi Unisciti a noi
Nuovo cliente? Comincia qui.
0

Scheda di protezione Seiko IC 10A per batteria 18650 Lipo 3S 11.1V 12V 12.6V

US$8.99
~~US$10.79~~
Acquista ora

Recensioni clienti

4.98 su 5

Vedi tutte 122 recensioni

Scrivi una recensione Ottieni punti doppi di Banggood se sei uno tra i primi 3 clienti ad aver pubblicato una recensione del prodotto.

Tutte le recensioni (122)
Immagine (23)
Video (0)
Tutte le stelle
- Tutte le stelle(122)
- 5 Inizia(119)
- 4 Inizia(3)
- 3 Inizia(0)
- 2 Inizia(0)
- 1 Inizia(0)

Ordina per:

Recensione Top

Recensione Top
Il più utile
Più Recente

Recensioni solo dal tuo paese (Italy)

|

Spettacolo originale

Una parte della recensione è stata tradotta automaticamente.

AdamDVIP3
GR
03/02/2018

I brought this charger/balancer form Banggood T610 - https://goo.gl/KLukPU and i am very happy. But what about over-discharge protection? So, i brought this 3S protection board. I have tested the cutoff voltage and it is at about 2,33V. This is ok if you are draining your batteries with high current, because you have a fair amound of voltage drop. But it is low if you are using low current. You have to apply charging voltage to overide the "lock" after the over-dischard cutoff and the voltage must be above 2,9V in each battery to do that. I also did the some tests to this 2s protection board https://goo.gl/kJ4qX4 and it is really good and cheap.

I brought this charger/balancer form Banggood T610 - https://goo.gl/KLukPU and i am very happy. But what about over-discharge protection? So, i brought this 3S protection board. I have tested the cutoff voltage and it is at about 2,33V. This is ok if you are draining your batteries with high current, because you have a fair amound of voltage drop. But it is low if you are using low current. You have to apply charging voltage to overide the "lock" after the over-dischard cutoff and the voltage must be above 2,9V in each battery to do that. I also did the some tests to this 2s protection board https://goo.gl/kJ4qX4 and it is really good and cheap.

I brought this charger/balancer form Banggood T610 - https://goo.gl/KLukPU and i am very happy. But what about over-discharge protection? So, i brought this 3S protection board. I have tested the cutoff voltage and it is at about 2,33V. This is ok if you are draining your batteries with high current, because you have a fair amound of voltage drop. But it is low if you are using low current. You have to apply charging voltage to overide the "lock" after the over-dischard cutoff and the voltage must be above 2,9V in each battery to do that. I also did the some tests to this 2s protection board https://goo.gl/kJ4qX4 and it is really good and cheap.
5

Commento

Spettacolo originale
lrogeVIP5
FR
06/09/2019

BMS with a very good quality/price ratio

BMS with a very good quality/price ratio

BMS with a very good quality/price ratio
1

Commento

Spettacolo originale

Show:

Totale 0 pagine

Vai alla pagina

Partire

recommendation for you