Recensioni clienti

4.94 su 5
Scrivi una recensione
  • Tutte le recensioni (62)
  • Immagine (20)
  • Video (3)
  • Tutte le stelle
    • Tutte le stelle(62)
    • 5 Inizia(59)
    • 4 Inizia(2)
    • 3 Inizia(1)
    • 2 Inizia(0)
    • 1 Inizia(0)
Ordina per:
Recensione Top
  • Recensione Top
  • Il più utile
  • Più Recente
  • 2019-10-14 04:07:01

    Отличная недорогая низкопрофильная рама, но будьте готовы, что не все компоненты влезут в нее по высоте без допиливания. Лично у меня влезло впритирку, при этом ремешок аккумулятора пришлось пускать по верху, что не есть хорошо, так как нагрузка идет на ушки рамы, а не на всю верхнюю

  • cascu
    2020-02-24 17:58:44

    very strong, better than what I expected!!!! can't wait to start my next build

  • jivaro
    2018-11-01 11:35:01

    Well designed frame. Everything is optimized to bring in equipment without lost space. I put an Artower F4 + card in the center. The VTX card and Spektrum SPM4648 DSMX Diversity receiver are on the back. There is still room in front for all kinds of cameras, the RunCam Split Mini is comfortable. With 4 DYS 2205-2550 kV motors and a Li-Po 3S 1800 mAh pack, the weight is just 500 g. Frame bien conçue. Tout est optimisé pour faire entrer l'équipement sans place perdue. J'ai mis une carte Artower

  • 2018-08-02 03:26:09

    Bought this frame because of the low profile! Easy put together! There is room for 2 stack but.. Its really really tight. Overall where happy with the look and how it perform!.. Last if this is your first build you might have trouble with the small room for flight controller and everything. So not good for beginners.

  • 2018-08-04 03:49:31

    Great frame only 2 cons: - one arm bolt is the FC bolt so you can't tighten it enough and arm is little bit loose - if you have FC with VTX check if antenna connector isn't too high and fit between plates

  • 2018-09-23 12:57:23

    fc and esc fits nicely , leaving sufficient room for vtx and receaver. frame has relatively thin arm plates ,overall it is a nice sleek design.

  • 2018-07-10 04:50:56

    But too low!!! Really. You must be aware there is no room for more than one floor at high. Could be great suitable FC+ESC in one board and 30x30 vtx. At all carbon is good. In complect is filler for rounding edges.

  • booly
    2018-10-23 02:43:50

    It looks pretty good but i already break 3 arms and there no spare arma available. the space between the botton and top plate is very thin so if you are a rookie builder this is not for you. the arms are attached by two screws and 1 of the is also a screw from the stack so its not easy to swap arms. i have costum made the arms of my old martian and put it on this quad and now it is a tank and It flys great tho!

  • 2018-06-29 17:30:21

    Super frame makes you happy. I can only recommend.

  • zordep
    2019-08-12 21:17:53

    looks good! no paperwork in the box but doesn’t really bother me


    Go to page


    Magari ti piace

    recommendation for you
    • 20,92€
    • 28,11€
    • 30,43€
    • 60,81€
    • 26,74€
    • 26,24€
    • 11,43€
    • 48,26€
    • 64,61€
    • 48,26€
    • 29,82€
    • 24,42€
    • 22,18€
    • 8,71€
    • 30,20€
    • 39,78€
    • 7,18€
    • 8,46€