Recensioni clienti

4.94 su 5
Scrivi una recensione
  • Tutte le recensioni (32)
  • Immagine (6)
  • Video (0)
  • Tutte le stelle
    • Tutte le stelle(32)
    • 5 Inizia(30)
    • 4 Inizia(2)
    • 3 Inizia(0)
    • 2 Inizia(0)
    • 1 Inizia(0)
Ordina per:
Recensione Top
  • Recensione Top
  • Il più utile
  • Più Recente
  • February-28 2020 12:34:29

    La notice d'assemblage (version 2) reçue avec le kit, comporte une erreur dans la partie montage des résistances (voir photo). 2 fois la résistance R16 avec une valeur différente et pas de résistance R26 pourtant présente sur la platine. Je n'ai donc pas pu poursuivre le montage car je ne voulais pas risquer de détruire l'appareil pour une résistance mal placée. J'ai contacté le support du constructeur pour avoir une solution. J'attends leur réponse. Pour information les notices disponible

    Commento (1)
  • October-03 2020 11:21:41

    great!

    Commento
  • October-05 2020 16:18:20

    Works great. It will require upgrade to latest firmware version as current one is not stable.

    Commento
  • June-12 2020 13:33:55

    works as advertised. good for diyers and people who need to analyze simple signals

    Commento
  • April-10 2020 12:24:11

    Works great. I love how compact and multifunctional it is. Portable and cheap.

    Commento
  • September-28 2019 10:36:04

    It is generally a good product for its money as it is 2 channels (y, x). For those who get it disassembled a little attention and follow the instructions.

    Commento
  • kenVIP3
    AU
    November-09 2020 18:17:55

    This device came well packaged, and with all vulnerable parts in their own protective plastic sleeve. There were many small resistors that needed soldering into the 2 main boards - suggest using a multimeter to accurately determine their value before soldering into the board, making this work less of a burden. Soldering the 2 probe connector sockets to the circuit board needed a lot of heat - my 60W soldering iron only just had enough heat to eventually solder these in place. Suggest buying the

    Commento
  • October-11 2020 03:47:53

    Nice product with high quality. Excellent instructions. The only minor problem was to solder the large BNC connector pins to the board (the tin does not easily flow out to make a good soldering connection). It would also be a good idea to indicate the tolerance of the 0 V measurements in step 5. "0 V" means within a couple of mV, but what is the expected limit?

    Commento (1)
  • October-09 2020 17:54:30

    Quick delivery. After assembly works as advertised. Came with 1.0 firmware, updated to most recent one - took me a while to figure out how to do the update - the link to instruction is on the forums in "WAVE2 update" thread only, which is odd (no link to the instruction on the firmware download page).

    Commento
  • June-22 2020 15:40:10

    Fine instrument, but assembly instruction manual was a bad copy, hard to read and almost blank in some spots; some resistors are present in the kit, and needed, but strikedthrough in manual. The rotary encoder is a little bit cumbersome to solder and mount, clearer explanation will be better. Anyway, good value for the price

    Commento
Show:

    Go to page

    Go

    Magari ti piace

    recommendation for you
    • 16,00€
    • 16,84€
    • 13,47€
    • 2,52€
    • 6,73€
    • 6,73€
    • 9,26€
    • 7,10€
    • 1,68€
    • 4,31€
    • 10,69€
    • 17,68€
    • 5,05€
    • 3,36€
    • 4,20€
    • 1,68€
    • 14,31€
    • 75,17€