Modulo alimentatore di corrente costante di tensione in discesa di 1.25V-30V da 7V-35V DC a LED
Una parte della recensione è stata tradotta automaticamente.
This is great module, that can be used both for battery charging and as LED driver. I mostly use it as a driver for these dirt cheap 10w LED: https://goo.gl/g3aBNy
I have already 3 units, work as expected as a led drivers, but one of them I instantly burn by bad polarity input. So be careful about it.
Second achat de ce module qui fonctionne parfaitement : je l'utilise pour adapter un petit panneau solaire 18V à la charge de différents accus. Réglages faciles et précis.
Works just fine. Recommended
I bought 3 pcs. 2 for my LEDS around the house which are 6x 24V 300mA, three for each module. And the other one is for testing and 18650 battery charging as well as for resetting the battery protection circuit. One time I connected the Input reverse. It was set to 4.2V and 420mA on the 12V line of a PC power supply. The M4 diode was completely cracked through the middle xD Luckily I have a couple (500pcs) of 1N4007 diodes :D SKU168111 Now the module is working as before...
This is great module, that can be used both for battery charging and as LED driver.It is quite versatile as LED driver and I mostly use it as a driver for these dirt cheap 10w LED: https://goo.gl/g3aBNy
Works great as an led driver. It was a bit difficut to find the right settings. Just turn everything all the way down then rise voltage and current solwly with multimeter attached.
Good, as described by seller
Nice Product
I bought two and both work as they should. No problems so far. Using them to power a 10W LED chip.