Works fine, current value is about 950-1000

Works fine, current value is about 950-1000

Works fine, current value is about 950-1000

good product!

good product!

good product!

Compatible Size Good Quality Shunt Came along with XT 30 connector Should have XT60 CONNECTOR Will check with soldering wire directly

Compatible Size Good Quality Shunt Came along with XT 30 connector Should have XT60 CONNECTOR Will check with soldering wire directly

Compatible Size Good Quality Shunt Came along with XT 30 connector Should have XT60 CONNECTOR Will check with soldering wire directly

took me a little bit to get this showing the correct currents throughout the range using the HGLRC F428 stack but 760 scale with 60 offset gave me good results (confirmed with current meter.) Love this little thing. nice and small and well packed and comes with heatshrink

took me a little bit to get this showing the correct currents throughout the range using the HGLRC F428 stack but 760 scale with 60 offset gave me good results (confirmed with current meter.) Love this little thing. nice and small and well packed and comes with heatshrink

took me a little bit to get this showing the correct currents throughout the range using the HGLRC F428 stack but 760 scale with 60 offset gave me good results (confirmed with current meter.) Love this little thing. nice and small and well packed and comes with heatshrink

Sensore di corrente.

Current sensor.

Sensore di corrente.

I have removed the XT30 connector and solder on Wires. It is very small. The value is about 980.

I have removed the XT30 connector and solder on Wires. It is very small. The value is about 980.

I have removed the XT30 connector and solder on Wires. It is very small. The value is about 980.

Not cheap but is very usefull in order to measure the current on my 3 inch for long range

Not cheap but is very usefull in order to measure the current on my 3 inch for long range

Not cheap but is very usefull in order to measure the current on my 3 inch for long range

Easy to add a low esr capacitor to the outputs to reduce noise. Came with heat shrink.

Easy to add a low esr capacitor to the outputs to reduce noise. Came with heat shrink.

Easy to add a low esr capacitor to the outputs to reduce noise. Came with heat shrink.

Works fine, but + and - should be changed.

Works fine, but + and - should be changed.

Works fine, but + and - should be changed.

Looks nice, needs to be tested.

Looks nice, needs to be tested.

Looks nice, needs to be tested.