Spezione in United Kingdom , USD
Top recensione positiva per %s su Banggood, Acquista i migliori %s con il prezzo più basso su Banggood. Sfoglia le recensioni positive più utili per %s prima di acquistare., giocattoli rc, sport divertenti, moda, elettronica popolare
PaulS 05/06/2015
As noted above, the values of the components are shown on the PC board. This means once a component is installed, you can no longer see the value it is supposed to be. I assembled mine in about two hours, observed the polarity of the components and connected it to a 24Vac supply. Nothing happened. The LED did not light, and the output measures only 0.63 vdc. As these is no paper documentation, I have no idea of how to trouble-shoot this item. The only items one can disconnect are the pots and to check the voltage at the fan connector. Pots are correct and the fan output is correct. None of the rectifiers are warm, and the LED does not light. Does anyone have any good ideas? Any help will be appreciated. As noted by others, a 115/24v 3A transformer required to power this item is rather expensive - Beware!! As of this writing, this project is not good. Can NOT recommend it!!
8
Commento (9)
Consegnare
  • Banggood Dear customer,Can you send videos to us? so that we can solve your problem.Best regards

    10/05/2024
  • cassiopeia i have the same Problem. u2 very hot, Output 0.34V

    Risposta 09/06/2015
  • cassiopeia it works, Q1 was defective

    Risposta 11/06/2015
  • ppotocnj Mine work perfectly it take me 20 minutes to assembly. Wery nice product.

    Risposta 15/06/2015
  • tonyjobson I have the same problem. IC near the trim pot gets very hot. only arround 0.5 volts on the output.does not work.

    Risposta 03/10/2015
  • banggood @tonyjobson Hi ,
    Sorry to hear that.
    Would you please contact our customer service cservice@banggood.com?
    Please send us your order number and a video or some pictures to show your problem.

    Risposta 05/10/2015
  • ricardomagagnin Same problem, when I removed the Q1 the output goes to 15V. I really do not know how to solve it.

    Risposta 29/10/2016
  • Halmar I got 0.4VDC on output when I hooked mine up for testing the first time on a DC source. You have to use an AC transformer because there is a charge pump circuit to generate negative voltage for the Op-Amps.

    Risposta 06/01/2017
  • banggood @ZenElektronika Dear customer,
    Thank you for choosing Banggood and sorry for your any inconvenience came up with the product.
    If you need any support, you can contact us via this link:http://www.banggood.com/Contact-Us_hi111, and we will give you a good solution.
    Best regards :)
    Banggood team

    Risposta 09/08/2018
Indagine di Soddisfazione

Scarica l'APP per ottenere un'esclusiva sconti di 10% coupon