Websteria
D: I’m getting just a blank C for temperature. what to check? No temp, just a C.
Domandata da Websteria il 2019-09-25 05:33:52
D: would it be possible to get a review copy to assemble and review?
Domandata da Websteria il 2019-09-15 01:23:38
Wisent maybe it is ok
2019-09-20 03:57:20 Utile (0)
Websteria This is a big problem. I think quality control on these chips is bad. I got maybe 2 out of 10 that didn’t have a problem.
2019-09-15 01:34:17 Utile (0)
Websteria This is essential for troubleshooting. I can’t believe a kit company wouldn’t release a schematic for a kit?!! How are we supposed to learn from this circuit?
2019-09-15 01:28:12 Utile (0)
Websteria You may have a bad mcu or the blue shorted to something else on the led side. All the anodes are tied together so a short at one would appear on all. Also just confirm all your mcu pins are soldered well.
2019-09-15 01:25:27 Utile (1)
Websteria ledsales: did you check the battery voltages going to the clock chip. I’ve had lots of problems but that hasn’t been one unless the connection between the mpu and clock are connected. otherwise time can’t be set and doesn’t tick.
D: 3rd digit is off, i need the schematic to find the track that control that digit. thanks.
Domandata da octaviofg il 2018-04-08 01:16:38
Websteria Did you ever get this fixed? My first digit won’t turn on either. Everything else works. It seems to mirror some other digits but only on like 6-7. So weird. Checked every component. About to give up and hot air remove the mcu and respolder it. Pity. Beautiful clock for the rest of it.
2019-08-31 02:53:47 Utile (0)
Ti invitiamo sinceramente a iscriverti all'e-mail di risposta all'invito!
Se ti iscrivi, ti inviteremo via e-mail a rispondere alle domande che le persone hanno sui prodotti. Iscrivendoti] guadagnerai anche il "Badge utile "! Puoi annullare l'iscrizione in qualsiasi momento nella pagina delle impostazioni sulla privacy.
Aiuta gli altri e sii più felice!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
Stefan With a 1% 10 kOhm thermistor, the reference temperature is 4 degrees Celsius below the clock. The software would then have to be changed.
2020-10-09 07:37:32 Utile (0)