chenzo
i miei contenuti
Tutti i messaggi
Recensioni
Commenti
risposta
Domande

Tutti i messaggi

chenzo 22/01/2021
I have had this light installed for a few weeks now, and it has been exposed to rain on a few occasions. The light continues to work very well. The sensor is excellent easily sensing people from a minimum of 5m away. It is now summer for me, and the solar cells receive minimum of 8 hours of strong sunlight. The lights do not get used very much, so I'm not sure how the light will work in winter time when there is less sunlight for charging. In the photos you will notice that the light has a rubber seal, and the solar panel does not have a seal. You can see for the light and the solar panel there is no evidence of water penetration, so I would say these are both waterproof. I have a photo of the screws and some have some surface rust, but still function ok. You can also see from the photos how bright the light is. I don't think it is 600 lumans, but it lights up an areas 5m x 5m with no problem. It is adequate for my application. The lithium battery is 3.7V. The specifications say the light is 30W. That means the battery will need to supply about 8 Amps. I don't think this type of battery can supply 8 Amps, so I don't believe the light is 30W. However, as the photos show it lights an area 5m x 5m no problem. This is a great product, and I hope it lasts many years. I will see how well the plastic casing resists the UV sunlight.
COB 100LED Luce 30W 600Lumen IP65 Lampada Solare Esterna Parco Cortile Giardino Luce da Campeggio Luce da Lavoro
US$13.15 US$19.99
42
raccomandazioni
Commento (5)
chenzo 22/01/2021
In the few weeks the solar panel has been installed it has been exposed to rain on a few occasions. The light is installed under cover, away from the rain. The light continues to work very well. The sensor is excellent easily sensing people from a minimum of 2m away. The light do not get used very much, so I'm not sure how the light will work in winter time when there is less sunlight for charging. Currently it is summer, and there is plenty of sunlight for charging. In the photos you will notice that the light has a rubber seal, and the solar panel does not have a seal. You can see for the solar panel there is no evidence of water penetration, so I would say that it is waterproof. You can also see from the photos how bright the light is. I don't think it is 600 lumens, but it lights up an areas 1.2m x 10m with no problem. It is adequate for my application. The lithium battery is 3.7V. The specifications say the light is 30W. That means the battery will need to supply about 8 Amps. I don't think this type of battery can supply 8 Amps, so I don't believe the light is 30W. However, as the photos show it lights an area no problem.
COB 100LED Luce 30W 600Lumen IP65 Lampada Solare Esterna Parco Cortile Giardino Luce da Campeggio Luce da Lavoro
US$13.15 US$19.99
2
raccomandazioni
Commento (0)
chenzo 09/05/2021
Items received as described. But, the packaging arrive damaged. There was no damage to the product, and all work ok. I'm unsure if the packaging was damaged from the factory or during transport/delivery. I could not tell if the packaging was damaged until I remove the products from the parcel. These are the water proof version. I have purchased other no-name brand of the same looking product and they were not water proof. These lights are not 30W. They are more like 6W, but they are bright enough to light up an area 5m by 5m to safely walk and carry out simple jobs under the light. They are perfect for lighting up the area in front of a gate or small courtyard area. I have also used these lights for inside my garage. The solar charging works great. The sensor is quite sensitive. I am very happy with this product. I have purchased 5 of them. What best is that it consumes no electricity. There is provision to add an additional lithium 18650 battery to make the light last longer. This may be particularly good during winter months when there is less sunshine to charge the battery. But, if the light does not get used much there is no need for an extra battery.
COB 100LED Luce 30W 600Lumen IP65 Lampada Solare Esterna Parco Cortile Giardino Luce da Campeggio Luce da Lavoro
US$13.15 US$19.99
10
raccomandazioni
Commento (1)
chenzo 09/05/2021
This is the second one I have purchased. It works perfectly. Great to use to control your Android TV box and streaming services. Easily charges with USB mini cable. Lasts for several weeks with regular use. Led lights flash to indicate the remote needs charging. Great product Banggood. Thank you.
Wechip W1 Air Mouse Senza Fili 2.4g Fly Air Mouse per Android Tv Scatola / Mini Pc / Tv / Win 10
US$24.99 US$29.99
1
raccomandazioni
Commento (1)
chenzo 09/05/2021
Product arrived as described. Packaged very well. No damage to product. I purchased this item specifically to convert 1 side of my Mankati 3D printer to print with 1.75mm flex filament. Now I can print with 3mm and 1.75mm filament. The extruder mounts perfectly to a nema 17 stepper motor. This extruder can work with flexible filament. When I first used it I had to change the e-steps value. Because this item is transparent it helps to see any problems. When I tried my first print the flexible filament was escaping between the rollers. After some trial and error I found that the original spring is too strong/stiff. NOTE: IF YOU WANT TO PRINT WITH FLEX FILAMENT YOU WILL NEED TO CHANGE THE SPRING. I used 2 springs from a bicycle quick-release skewer. These springs have much less strength than original spring. See photos. These worked perfectly. After some tuning of print speed and flow the print quality is excellent. Using the existing spring I expect that this extruder will work very well. I will continue to use the extruder with the new springs. Banggood, I would recommend you supply a weaker spring; maybe half the strength would be ok.
Estrusore a doppia unità TWO TREES® DDB Extruder versione trasparente per stampante 3D
US$19.54 US$20.99
5
raccomandazioni
Commento (0)
chenzo 09/05/2021
Product arrived as described. Product is packaged very well. Quality seems very good. Some swarf found in-between the fins, but is easily removed. Not a real problem. The threads on either end are formed very well. No damage. I have purchased this as a spare part. I haven't used it yet. See photos for visual details of the product. I gave this 4 stars only because I haven't used it to check the performance.
Radiator Dispersore di calore in alluminio remoto V6 Bowden con testa J di 4,1 mm per estrusore stampante 3D
US$8.07 US$8.99
5
raccomandazioni
Commento (0)
chenzo 09/01/2021
Great sounding earpods. Excellent quality for listening to music and audio. Audio quality not as good for phone conversations. Sound is a bit muffled. Can is very compact, has a USB-C charging port at the bottom. But, earpods can be a bit difficult to remove from the case. Considering the price and quality this is not a problem. Touch control works great, but can take a few attempts to get used to it and learn the functions. Again, this is not a problem. Thank you Banggood. Great product.
NUOVO Lenovo LP1 TWS Auricolari bluetooth IPX4 Cuffie sportive impermeabili con cancellazione del rumore HIFI Cuffie per bassi con microfono Type-C Ricarica
US$28.86 US$33.99
7
raccomandazioni
Commento (0)
Stampante 3D potenziata Estrusore Titan + Kit motore passo-passo Nema17 per V6 Filamento Bowden da 1,75 mm con testa a J con rapporto driver Hotend 3: 1
US$25.41 US$21.61

D: What is the model number of the stepper motor?

Domandata da chenzo il 2021-03-23 05:06:50

Mrmartinc 34mm Nema 17 Stepper Motor

2021-04-06 06:19:43 Utile (0)
Consegnare
risposta (1)
Stampante 3D potenziata Estrusore Titan + Kit motore passo-passo Nema17 per V6 Filamento Bowden da 1,75 mm con testa a J con rapporto driver Hotend 3: 1
US$25.41 US$21.61

D: Can the stepper motor work with 24V supply?

Domandata da chenzo il 2021-03-23 05:07:20

Liltwas 12V.

2021-04-06 06:19:38 Utile (1)
Consegnare
risposta (1)
chenzo 09/01/2021
Easy to use. I am using this on and Android TV box. Plug in the receiver into a spare USB port and no set up required. The product came already charged and worked right out of the box. Keyboard function work great. I have not tried the IR programming function yet. I don't need it at the moment. Thank you Banggood. Great product.
Wechip W1 Air Mouse Senza Fili 2.4g Fly Air Mouse per Android Tv Scatola / Mini Pc / Tv / Win 10
US$24.99 US$29.99
4
raccomandazioni
Commento (1)
chenzo 22/01/2021
Fast delivery. Well packaged. These will be great for 3D printed casings for my electronic projects or replacement screws for other small projects. These are not stainless steel though. Check the label in the photo.
Suleve M2SP2 800 pezzi M2 in acciaio inox Phillips con testa a croce Viti autofilettanti kit assortimento 4-20mm
US$12.69 US$13.99
1
raccomandazioni
Commento (0)
Lampada da giardino ad energia solare da 30 W COB 100LED con sensore PIR, impermeabile IP65, per esterno, strada, giardino, cortile, campeggio e luce da proiezione
US$25.99 US$31.99

D: The photos of the product in the listing are not correct. The actual product has an on/off button, and the light does not have a rubber seal to make it waterproof. The photos are of the IPree product. When will you upload the correct product images for this product?

Domandata da chenzo il 2021-01-22 04:28:54
Consegnare
risposta (1)
chenzo 22/01/2021
Fast delivery. Well packaged. These will be great for 3D printed casings for my electronic projects or replacement screws for other small projects.
Suleve ™ M3CP1 500Pz M3 Phillips Vite Kit assortimento di legno Vites testa in acciaio al carbonio con rivestimento in zinco nero
US$12.69 US$13.99
0
raccomandazioni
Commento (0)
chenzo 22/01/2021
Fast delivery. Well packaged. These will be great for 3D printed casings for my electronic projects or other projects.
Suleve ™ M3SP3 200 pezzi M3 304 Acciaio inossidabile Phillips Pan / Testa piatta Autofilettante Lavorazione del legno Vite Kit assortimento
US$8.99 US$12.99
0
raccomandazioni
Commento (0)
chenzo 22/01/2021
Fast delivery. Well packaged. These will be great for 3D printed casings for my electronic projects or other smaller projects. I don't these are stainless steel though. See the label on the photo.
Kit assortimento viti autofilettanti Suleve M2SP3 800 pezzi M2 in acciaio inossidabile Phillips a testa piatta a croce
US$13.85 US$14.99
0
raccomandazioni
Commento (0)
chenzo 22/01/2021
Fast delivery. Well packaged. These will be great for 3D printed casings for my electronic projects or replacement screws for glasses etc. Thank you Banggood.
Suleve ™ MXCP4 1000Pcs Phillips Vite Kit mini Vites elettronico in acciaio al carbonio a testa tonda M1 M1.2 M1.4 M1.7
US$13.85 US$14.99
0
raccomandazioni
Commento (0)
chenzo 09/01/2021
Product looks like excellent quality. All seem in working condition. Item received as advertised. Thank you Banggood.
USB 5pcs per la testa femminile Mini-5P Head DIP alla scheda Adapter Adapter 2.54mm
US$6.92 US$7.99
1
raccomandazioni
Commento (0)
chenzo 09/01/2021
I used this bearing to convert my existing bearing for diameter 3mm filament to diameter 1.75mm filament. It fits and works perfectly. Thank you Banggood.
Cuscinetto a ralla a U Anet® U604ZZ per parti della cinghia di temporizzazione dell'estrusore per stampante 3D
US$6.92 US$7.99
0
raccomandazioni
Commento (0)
chenzo 09/01/2021
I used this bearing to convert my existing bearing for diameter 3mm filament to diameter 1.75mm filament. It fits and works perfectly. Thank you Banggood.
Gola dell'estrusore TRONXY® V6 0.2 / 0.3 / 0.4 / 0.5 / 0.6 / 0.8mm in ottone con filettatura M6 per parti stampante 3D
US$6.92 US$7.99
0
raccomandazioni
Commento (0)
chenzo 08/03/2020
The watch arrived on time and as expected, and in excellent condition. It seems to function very well, but I'm not sure about the accuracy of the blood pressure monitor. Other functions seems fine though. The phone app seems to function quite well and is easy enough to use. It's easy to connect the watch to the app. The watch does what it was designed to do, and is great for the price point.
Orologio smart Goral S5 dal design elegante, display a colori, messaggi visibili, promemoria e lampada smart per la respirazione
US$17.77 US$26.99
0
raccomandazioni
Commento (0)

Sei l'esperto, puoi aiutare?

Ti invitiamo sinceramente a iscriverti all'e-mail di risposta all'invito!

Se ti iscrivi, ti inviteremo via e-mail a rispondere alle domande che le persone hanno sui prodotti. Iscrivendoti] guadagnerai anche il "Badge utile "! Puoi annullare l'iscrizione in qualsiasi momento nella pagina delle impostazioni sulla privacy.

Aiuta gli altri e sii più felice!

  • sottoscrivi

Informazioni sui badge

I badge sono collegati alla community e gli utenti guadagnano badge creando contenuti di qualità, completando missioni o partecipando ad attività speciali. Le persone specifiche avranno anche il proprio badge esclusivo.
Badge CEO

il badge ceo è di proprietà solo del boss di banggood.

I badge che puoi guadagnare arriveranno presto
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe