sgtnaaman
D: Will this module work with radiomaster zorro cc2500?
Domandata da BG224313521 il 2022-04-03 10:09:17
sgtnaaman I think the module is made for the Jumper T-Lite Radio. I would suggest to buy the Beta FPV Lite, Mini module (don't know the correct name, right now). The Beta FPV module is made for a variety of Liter Transmitters.
2022-04-06 07:03:26 Utile (0)
sgtnaaman No, you can not remove the battery.
2022-03-16 10:37:53 Utile (0)D: Would this work for the TinyHawk 3?
Domandata da LifeBuys il 2022-02-13 05:51:08
sgtnaaman I think it should work perfectly with the Tinyhawk 3. I used it with an Tinyhawk 2 Freestyle and it works great. So I can see no reason for the cam, not to work with the Tinyhawk 3.
2022-03-16 10:36:53 Utile (0)
sgtnaaman meddl, sieht echt klasse aus der Bausatz. Freu mich schon wahnsinnig drauf, wenn meiner Ende der Woche eintrudelt... 😋
D: is this ready to fly apart from batteries? dose it come with a controller?
Domandata da gouthy il 2021-08-29 03:17:12
sgtnaaman No, it's bind and fly, apart from the lipo akku. That means, you need a transmitter-controller, matching with the receiver you ordered with the quad.
2022-02-10 03:11:36 Utile (0)
sgtnaaman CC2500 hat deutlich weniger Protokolle! 4in1 enthält, eventuell in unterschiedlichen Ländern nicht zugelassene Protokolle!
2021-12-05 02:02:34 Utile (0)
sgtnaaman The fastest flight, since i've got the Novice 4, was almost 99 Kilometer per hour. And with oncoming wind it almost reached 95 Kph. Always flown with the stock 4S 1100mAh LiPo packs.
2021-11-28 12:48:49 Utile (0)D: what is the size of the standoffs?
Domandata da AniQuad il 2021-09-28 01:40:11
sgtnaaman The size of the hexagonal plastic standoffs is M2,5 by 20mm length.
2021-10-11 06:02:23 Utile (0)
D: Does this antenna have an MHF-3 connector?
Domandata da Pjurenergy il 2021-10-06 05:26:47
sgtnaaman This Antenna comes equipped with an IPEX Plug.
2021-10-07 12:04:37 Utile (0)D: Do I have to use a specific fpv camera. Or can I just "plug" in any fpv camera?
Domandata da BG221145413 il 2021-09-25 02:28:51
sgtnaaman the most fpv cam's are assembled with 3 wires or an 3 pin female connector. they have 3 colours, red for 5V +, black for ground and yellow for video signal out. These 3 cables have to be soldered to one side of the DVR unit and then you have to connect the other side of the DVR unit to where the cam was connected to, before. The DVR unit also comes with 1 male 3 pin connector with cables and 1 female 3 pin connector with cables. this means, you can attach almost every 5 Volt powered FPV cam with 3 cables.
2021-09-28 06:25:05 Utile (1)
D: if i use the camera 5 minutes, the camera turn off and i have to recharg it. it is normal??
Domandata da TiAgUH_DcI il 2021-09-06 01:25:27
sgtnaaman mine did the same. The runtime isn't even long enough, to get out of the house with it, place it and get back in to check the ive iew. When I get back inside, the live feed wasn't loadable. I think there's only a little Lipo 1S 250mAh or 300mAh inside. In comparison to it's size and weight it couldn't be much more and with WiFi, cam and DVR running, it's empty in a few Minutes.
2021-09-06 02:24:08 Utile (1)D: Does this cable work for velicidrone
Domandata da saxon4034 il 2018-06-04 07:04:35
naaman The Nb4 works with VRC Pro without any dongles. Just plug the transmitter into your Windows 10 PC, via USB and turn the transmitter on. Windows 10 will automatically detect the Noble NB4 as game-controller. You only have to assign the NB4 channels in VRC Pro and you can control VRC Pro with your Noble NB4.
2021-08-05 04:20:39 Utile (0)Ti invitiamo sinceramente a iscriverti all'e-mail di risposta all'invito!
Se ti iscrivi, ti inviteremo via e-mail a rispondere alle domande che le persone hanno sui prodotti. Iscrivendoti] guadagnerai anche il "Badge utile "! Puoi annullare l'iscrizione in qualsiasi momento nella pagina delle impostazioni sulla privacy.
Aiuta gli altri e sii più felice!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
