I have so many wings, but more Z-84's than any others, and I plan to always have at least one ready to fly. The handling, speed envelope, efficiency, stability manners, lack of bad habits, price, strength and capability are all virtues of this aircraft, very unusual to have all of them with any one plane altogether. I use one for medium range fpv (<5km), and it handles wind and weather no problems, turning downwind into effectively a stall just gives wobbly rough warnings to speed up, and as long as CG is forward no death spins or unrecoverable situations. You get good ground effect making smooth landings easy, just push it down once into the last foot. I run a 2s Liion 2300kv 6x4.6 and get 45 minute flights with plenty of climbing up mountains and hills. It is very stable and dependable in varying conditions and not prone to catching you out. A few of mods I do, glue a CF pin into the canopy nose preventing blow off, magnets just don't cut it, and replace the glass fibre wing spar with 4mm CF, for a massive increase in strength. I also step the motor back 20mm with aluminium posts, making CG easier and reducing noise by about 75%.

I have so many wings, but more Z-84's than any others, and I plan to always have at least one ready to fly. The handling, speed envelope, efficiency, stability manners, lack of bad habits, price, strength and capability are all virtues of this aircraft, very unusual to have all of them with any one plane altogether. I use one for medium range fpv (<5km), and it handles wind and weather no problems, turning downwind into effectively a stall just gives wobbly rough warnings to speed up, and as long as CG is forward no death spins or unrecoverable situations. You get good ground effect making smooth landings easy, just push it down once into the last foot. I run a 2s Liion 2300kv 6x4.6 and get 45 minute flights with plenty of climbing up mountains and hills. It is very stable and dependable in varying conditions and not prone to catching you out. A few of mods I do, glue a CF pin into the canopy nose preventing blow off, magnets just don't cut it, and replace the glass fibre wing spar with 4mm CF, for a massive increase in strength. I also step the motor back 20mm with aluminium posts, making CG easier and reducing noise by about 75%.

I have so many wings, but more Z-84's than any others, and I plan to always have at least one ready to fly. The handling, speed envelope, efficiency, stability manners, lack of bad habits, price, strength and capability are all virtues of this aircraft, very unusual to have all of them with any one plane altogether. I use one for medium range fpv (<5km), and it handles wind and weather no problems, turning downwind into effectively a stall just gives wobbly rough warnings to speed up, and as long as CG is forward no death spins or unrecoverable situations. You get good ground effect making smooth landings easy, just push it down once into the last foot. I run a 2s Liion 2300kv 6x4.6 and get 45 minute flights with plenty of climbing up mountains and hills. It is very stable and dependable in varying conditions and not prone to catching you out. A few of mods I do, glue a CF pin into the canopy nose preventing blow off, magnets just don't cut it, and replace the glass fibre wing spar with 4mm CF, for a massive increase in strength. I also step the motor back 20mm with aluminium posts, making CG easier and reducing noise by about 75%.

Grande piccola ala per afferrare per un volo veloce. Costruzione semplice, parti si incastrano perfettamente. Impostare con un motore drone 2300kv, Gemfan 5x5.2 3 pale prop, HW 30amp esc, e 1400mah 2s lipo. Mantenere la luce coda-end e si bilancerà ai marcatori CG sotto l'ala senza peso del naso aggiuntivo. Il mio è venuto in 300g di peso di volo con una batteria 1400mah 60c Hyperion graphene lipo. Disegna 14 ampere in questa configurazione. La schiuma EPO può anche gestire rapidamente vernici a spruzzo asciutte dal negozio di ferramenta locale in modo da poter personalizzare schemi di vernice!

Great little wing to grab for a quick flight. Simple build, parts fit together perfectly. Set up with a 2300kv drone motor, Gemfan 5x5.2 3 blade prop, HW 30amp esc, and 1400mah 2s lipo. Keep the tail-end light and it will balance at the CG markers under the wing without additional nose weight. Mine came in at 300g flying weight with a 1400mah 60c Hyperion graphene lipo battery. Draws 14 amps in this setup. The EPO foam can also handle quick dry spray paints from the local hardware store so you can do customise paint schemes!

Grande piccola ala per afferrare per un volo veloce. Costruzione semplice, parti si incastrano perfettamente. Impostare con un motore drone 2300kv, Gemfan 5x5.2 3 pale prop, HW 30amp esc, e 1400mah 2s lipo. Mantenere la luce coda-end e si bilancerà ai marcatori CG sotto l'ala senza peso del naso aggiuntivo. Il mio è venuto in 300g di peso di volo con una batteria 1400mah 60c Hyperion graphene lipo. Disegna 14 ampere in questa configurazione. La schiuma EPO può anche gestire rapidamente vernici a spruzzo asciutte dal negozio di ferramenta locale in modo da poter personalizzare schemi di vernice!

pas mal de place, assez solide. un poil délicate a equilibrer

pas mal de place, assez solide. un poil délicate a equilibrer

pas mal de place, assez solide. un poil délicate a equilibrer

Ben imballato e consegna rapida, 6 giorni. Grazie BG

Well packed and quick delivery,6 days. Thanks BG

Ben imballato e consegna rapida, 6 giorni. Grazie BG

stavebnice je hezky připravená

stavebnice je hezky připravená

stavebnice je hezky připravená

Test flew my Wing Wing Z-84 yesterday and I am very pleased with it. First flight was short because I had put in too much reflex. Adjusted reflex down and had two more good flights. Motor is an Angel A2208 2600KV, 30 amp esc., 1300 mah 2s lipo and a 6x4 prop. Only flew at about 50-60% throttle and model is quite fast. Glide is good and smooth. An excellent wing. I have no hesitation in recommending this model.

Test flew my Wing Wing Z-84 yesterday and I am very pleased with it. First flight was short because I had put in too much reflex. Adjusted reflex down and had two more good flights. Motor is an Angel A2208 2600KV, 30 amp esc., 1300 mah 2s lipo and a 6x4 prop. Only flew at about 50-60% throttle and model is quite fast. Glide is good and smooth. An excellent wing. I have no hesitation in recommending this model.

Test flew my Wing Wing Z-84 yesterday and I am very pleased with it. First flight was short because I had put in too much reflex. Adjusted reflex down and had two more good flights. Motor is an Angel A2208 2600KV, 30 amp esc., 1300 mah 2s lipo and a 6x4 prop. Only flew at about 50-60% throttle and model is quite fast. Glide is good and smooth. An excellent wing. I have no hesitation in recommending this model.

Prodotto di buona qualità. Vi consiglio di acquistare.

Good quality product. I recommend to buy.

Prodotto di buona qualità. Vi consiglio di acquistare.

After all, the outer box was crushed. There was no impact on the inside. Is the shipping company good with this?

After all, the outer box was crushed. There was no impact on the inside. Is the shipping company good with this?

After all, the outer box was crushed. There was no impact on the inside. Is the shipping company good with this?

Отличная модель приехала в целости.

Отличная модель приехала в целости.

Отличная модель приехала в целости.

Prodotto eccellente. Ben confezionato

excelente producto. bien embalado

Prodotto eccellente. Ben confezionato