Recensioni clienti

5 su 5
Scrivi una recensione
  • Tutte le recensioni (13)
  • Immagine (5)
  • Video (0)
  • Tutte le stelle
    • Tutte le stelle(13)
    • 5 Inizia(13)
    • 4 Inizia(0)
    • 3 Inizia(0)
    • 2 Inizia(0)
    • 1 Inizia(0)
Ordina per:
Recensione Top
  • Recensione Top
  • Il più utile
  • Più Recente
  • Matt051
    GB
    2019-10-24 15:18:59

    Good 3inch frame, lots of spare bits with it but would be nice if you could just buy the bottom plate separately. Basically l only used the buzzer and bottom plate out of the pack. The canopy is thick plastic not sure how it would hold up in a heavy crash, l went with a TPU canopy instead. frame it self is pretty stiff not much flex in it and handles well in the air. Will take a 16x16 stack l went with the Geprc 12amp whoop style board.

    Commento
  • 2019-12-06 00:22:48

    Pretty perfect Performance with Hakrc 16x16 Stack, 1304 6200kv Motors, HQ 3" props on 2S at 97g AUW. Voltage sag and ESC temperature are little bit critical but for cold days it seems ok. Rebuild with 3S Stack will follow to prevent ESC cooling shutdown. I used the canopy from URUAV UR12. BF v3 giving me the the best results so far. Motors are the cheap LDARC 1304, which aren't the highest quality and which I ordered seperatly. frame itself is nearly perfect and I start to Love unibody Designs.

    Commento
  • 2019-12-16 06:32:53

    Setup is with GepRC Stable 16x16 Tower, Betafpv 1204 5000kv Motors, 3" HQ props, Runcam Split 3 Nano. Great performance at AUW of 117gr on 3S. Did use the canopy of URUAV UR12.

    Commento
  • 2020-04-06 06:31:13

    nice frame and canopy

    Commento
  • 2019-10-06 10:50:21

    très jolie frame légère et pratique, je conseil pour le prix c’est vraiment pas mal du tout

    Commento
  • Camilo
    US
    2020-02-14 00:54:05

    Muy buen marco para un TP3. Lo único que no me gusta son las tuercas que se usan para la carcasa, deberían ser al menos de color negro pero en cambio son doradas y sobresalen muy feo

    Commento
  • Luis
    ES
    2019-12-09 07:22:45

    La carcasa y el frame son de buena calidad. A falta de prueba parece mejor que otros al menos en la carcasa ( no esta hecha con 3d o al menos no lo parece)

    Commento
  • Camilo
    US
    2019-12-05 12:41:40

    this is a good frame! I use a 4 in 1 flight controller with it. the quality of the frame and the canopy are really good. I just need to do some mods to fit a 4 in 1 flight controller and a fpv transmitter from the eachine trashcan. but in general is a good frame

    Commento
  • 2020-09-13 12:06:06

    This is really one of the more unique micro frames

    Commento
  • 2020-06-27 11:00:30

    Good and frame and canopy, nice design.

    Commento
Show:

    Go to page

    Go

    Magari ti piace

    recommendation for you
    • 3,26€
    • 3,04€
    • 11,90€
    • 13,70€
    • 10,28€
    • 4,94€
    • 12,28€
    • 14,67€
    • 27,33€
    • 53,46€
    • 38,56€
    • 3,42€
    • 8,82€
    • 7,27€
    • 13,70€
    • 2,97€
    • 3,27€
    • 13,22€