Well constructed, Good choice for testing and practicing with Analog readings from computer via USB port
Everything OK! Very well manufactured, sound good aspect! No tested yet!
good little device, works okay
attention de bien respecter les tension d entree de 3 volts max pour un usage a des tensions superieures construire des ponts diviseurs avec des resistances de haute valeur pour eviter influence sur mesure et proteger chaque entree soit avec des diodes ou des diodes zener ou avec avec des diodes 1n4148 mises en serie au nombre de 4 ou 5 max car 0,6V de seuil X 5 = 3 volts et donc conduction
Not yet extensively tested but seems to do the job. Instructions from elsewhere on Internet: 2. Using Introduction: 1>. Used on PC: install USB to serial port chip CH340 driver, and plug the module on the computer, IN0-IN9 connect sampling voltage positive, GND connects sampling voltage negative (common ground process); open the serial port debugging helper, select correct COM port and baud rate (115200), then check AD sampling result; the result updates 500ms per times, and users can modify this
All items from this seller are Great little boards and very flexible item. Quality of manufacture is good and item robust. The Ethernet remote controller is particularly well designed/built
Working fine.. but needs a better software. any suggestion ??
Nice quality
everything in order
resolution is little bit less