ワタクシの手元に届いた機体は初期型ではなく、ブラッシュアップされた改善版でした。 FC等には変更が無い物のモーターは1102-9000KVの物に変更されており、そのお陰で3Sバッテリーでのフライトも問題無く出来ます。コンパクトに纏まっており、デザインも良いので気軽に持ち出してお手軽に高画質な映像が撮影で来そうです♪ 標準装備でもし不満があるとするなら受信機の感度が弱いという点でしょうか。この辺は受信機を外付けする事で解消出来ます。 あと、最新の物はどうか？ワカリマセンが、このCrazybee-FCは内蔵BECが壊れ易いので、おまじないの為にコンデンサを追加しました。 詳しくはブログでレビュー記事を書かせて頂いておりますのでそちらを御覧下さい。 https://drone4.blog.fc2.com/blog-category-76.html

ワタクシの手元に届いた機体は初期型ではなく、ブラッシュアップされた改善版でした。 FC等には変更が無い物のモーターは1102-9000KVの物に変更されており、そのお陰で3Sバッテリーでのフライトも問題無く出来ます。コンパクトに纏まっており、デザインも良いので気軽に持ち出してお手軽に高画質な映像が撮影で来そうです♪ 標準装備でもし不満があるとするなら受信機の感度が弱いという点でしょうか。この辺は受信機を外付けする事で解消出来ます。 あと、最新の物はどうか？ワカリマセンが、このCrazybee-FCは内蔵BECが壊れ易いので、おまじないの為にコンデンサを追加しました。 詳しくはブログでレビュー記事を書かせて頂いておりますのでそちらを御覧下さい。 https://drone4.blog.fc2.com/blog-category-76.html

ワタクシの手元に届いた機体は初期型ではなく、ブラッシュアップされた改善版でした。 FC等には変更が無い物のモーターは1102-9000KVの物に変更されており、そのお陰で3Sバッテリーでのフライトも問題無く出来ます。コンパクトに纏まっており、デザインも良いので気軽に持ち出してお手軽に高画質な映像が撮影で来そうです♪ 標準装備でもし不満があるとするなら受信機の感度が弱いという点でしょうか。この辺は受信機を外付けする事で解消出来ます。 あと、最新の物はどうか？ワカリマセンが、このCrazybee-FCは内蔵BECが壊れ易いので、おまじないの為にコンデンサを追加しました。 詳しくはブログでレビュー記事を書かせて頂いておりますのでそちらを御覧下さい。 https://drone4.blog.fc2.com/blog-category-76.html

Quality is insanely good. bought the pnp version, used a FrSky R-xrs receiver and the range is outstanding!!! even fpv video is crazy for a micro quad like this ! love it ... highly recommended!! My long range: https://youtu.be/h_Ra3zLBujw

Quality is insanely good. bought the pnp version, used a FrSky R-xrs receiver and the range is outstanding!!! even fpv video is crazy for a micro quad like this ! love it ... highly recommended!! My long range: https://youtu.be/h_Ra3zLBujw

Quality is insanely good. bought the pnp version, used a FrSky R-xrs receiver and the range is outstanding!!! even fpv video is crazy for a micro quad like this ! love it ... highly recommended!! My long range: https://youtu.be/h_Ra3zLBujw

cool little multirotor

cool little multirotor

cool little multirotor

one go the best cinewhoops with very stable video . you can fly with 2S 450mah or 3s 300mah

one go the best cinewhoops with very stable video . you can fly with 2S 450mah or 3s 300mah

one go the best cinewhoops with very stable video . you can fly with 2S 450mah or 3s 300mah

лучший вуп ,что я держал в руках. жаль прм не заказал

лучший вуп ,что я держал в руках. жаль прм не заказал

лучший вуп ,что я держал в руках. жаль прм не заказал

Had some really good fun with this super mini quad will probably get another one

Had some really good fun with this super mini quad will probably get another one

Had some really good fun with this super mini quad will probably get another one

Nice flyer, not to impressed with the provided 3 cell batt, I am having better and longer flights with my 2 Cell GNB 450mah and 520MAh both are 80c. I did not care now happymodel decided to run all their wires, so I popped the canopy off and the VTX and wired it all neater and more out of the way then they did. I also added a UXII lollipop antenna, real easy upgrade. change the position of the microphone, reversed my turtle V2 bt 180 degrees to get the camera wires out of the way. Re-focused my Camera, badly out of focus. Made a few changes in betaflight.

Nice flyer, not to impressed with the provided 3 cell batt, I am having better and longer flights with my 2 Cell GNB 450mah and 520MAh both are 80c. I did not care now happymodel decided to run all their wires, so I popped the canopy off and the VTX and wired it all neater and more out of the way then they did. I also added a UXII lollipop antenna, real easy upgrade. change the position of the microphone, reversed my turtle V2 bt 180 degrees to get the camera wires out of the way. Re-focused my Camera, badly out of focus. Made a few changes in betaflight.

Nice flyer, not to impressed with the provided 3 cell batt, I am having better and longer flights with my 2 Cell GNB 450mah and 520MAh both are 80c. I did not care now happymodel decided to run all their wires, so I popped the canopy off and the VTX and wired it all neater and more out of the way then they did. I also added a UXII lollipop antenna, real easy upgrade. change the position of the microphone, reversed my turtle V2 bt 180 degrees to get the camera wires out of the way. Re-focused my Camera, badly out of focus. Made a few changes in betaflight.

It's a very nicely build copter. The motors have quite a lot of power and the Caddx Camera V2, though snugly fit, still does its job perfectly. It flies really well on 3S, which is great. It's still not perfect for freestyle, but the capabilities for the price are really great. There is a 'but' however. The ESCs are rated only for 5A on the Crazybee F4 V2.0 board, which the copter gets shipped with. Banggood started warning customers about lowering the throttle curve to ~75%, but that's just unjustified to sell the product knowing that it might burn out. Mine did. After falling into some debris, the motors spun just for a quick moment, enough to burn the F4 board (ESC + receiver chip - dunno why the latter?). It took along the Caddx Turtle V2 board as it's not powering up when supplying 5V externally (the FC is fried so had to reconnect it somewhere else). Overall BetaFPV at least tried to address the issue, here I don't think there's any support expected. Lowering the throttle curve is surely not the way to go, since any load on the motors will effectively burn the ESCs anyway. It's enough to hit a branch etc. Anyway the approximate repair cost is roughly 50% cost of the whole new copter. Not sue if it's worth at this point, as the ESCs may burn again. Too fragile in my opinion. Last flight of the Mobula 7 HD (its 5th in total): https://youtu.be/GfY7kNZyn1Q

It's a very nicely build copter. The motors have quite a lot of power and the Caddx Camera V2, though snugly fit, still does its job perfectly. It flies really well on 3S, which is great. It's still not perfect for freestyle, but the capabilities for the price are really great. There is a 'but' however. The ESCs are rated only for 5A on the Crazybee F4 V2.0 board, which the copter gets shipped with. Banggood started warning customers about lowering the throttle curve to ~75%, but that's just unjustified to sell the product knowing that it might burn out. Mine did. After falling into some debris, the motors spun just for a quick moment, enough to burn the F4 board (ESC + receiver chip - dunno why the latter?). It took along the Caddx Turtle V2 board as it's not powering up when supplying 5V externally (the FC is fried so had to reconnect it somewhere else). Overall BetaFPV at least tried to address the issue, here I don't think there's any support expected. Lowering the throttle curve is surely not the way to go, since any load on the motors will effectively burn the ESCs anyway. It's enough to hit a branch etc. Anyway the approximate repair cost is roughly 50% cost of the whole new copter. Not sue if it's worth at this point, as the ESCs may burn again. Too fragile in my opinion. Last flight of the Mobula 7 HD (its 5th in total): https://youtu.be/GfY7kNZyn1Q

It's a very nicely build copter. The motors have quite a lot of power and the Caddx Camera V2, though snugly fit, still does its job perfectly. It flies really well on 3S, which is great. It's still not perfect for freestyle, but the capabilities for the price are really great. There is a 'but' however. The ESCs are rated only for 5A on the Crazybee F4 V2.0 board, which the copter gets shipped with. Banggood started warning customers about lowering the throttle curve to ~75%, but that's just unjustified to sell the product knowing that it might burn out. Mine did. After falling into some debris, the motors spun just for a quick moment, enough to burn the F4 board (ESC + receiver chip - dunno why the latter?). It took along the Caddx Turtle V2 board as it's not powering up when supplying 5V externally (the FC is fried so had to reconnect it somewhere else). Overall BetaFPV at least tried to address the issue, here I don't think there's any support expected. Lowering the throttle curve is surely not the way to go, since any load on the motors will effectively burn the ESCs anyway. It's enough to hit a branch etc. Anyway the approximate repair cost is roughly 50% cost of the whole new copter. Not sue if it's worth at this point, as the ESCs may burn again. Too fragile in my opinion. Last flight of the Mobula 7 HD (its 5th in total): https://youtu.be/GfY7kNZyn1Q

Divertente drone, non l'ho ancora lanciato e non so come vola, ma sembra fuoco!

Прикольный дрон, ещё не запускал и не знаю как он в полёте, но внешне выглядит огонь!

Divertente drone, non l'ho ancora lanciato e non so come vola, ma sembra fuoco!

Sent quickly, it came 8 days before Chicago. Drone bind to Jumper t12, tried to fly. Standing old Betaflignt put a new one from the site. Calibrated accelerometers and flying. 8-)

Sent quickly, it came 8 days before Chicago. Drone bind to Jumper t12, tried to fly. Standing old Betaflignt put a new one from the site. Calibrated accelerometers and flying. 8-)

Sent quickly, it came 8 days before Chicago. Drone bind to Jumper t12, tried to fly. Standing old Betaflignt put a new one from the site. Calibrated accelerometers and flying. 8-)