I have received this camera module in good order but when I connected it it burned and smoked up immediately. I’ve connected it the way the manual says it should be connected. Why does the manual says that the black wire is +5 Volts and the red is ground… this is wrong.! Before I connected the camera I checked the forums and the forums confirmed the manual. So even I though it was wrong I connected it the way the manual says it should be connected. And it destroyed now… Take a good look at the picture in the manual.. It clearly shows the red wire on the ground and black on the +5 Volt. Banggood should make a Big red notification on the product site about the wrong information in the manual..! Greetings Michiel Willemse

I have received this camera module in good order but when I connected it it burned and smoked up immediately. I’ve connected it the way the manual says it should be connected. Why does the manual says that the black wire is +5 Volts and the red is ground… this is wrong.! Before I connected the camera I checked the forums and the forums confirmed the manual. So even I though it was wrong I connected it the way the manual says it should be connected. And it destroyed now… Take a good look at the picture in the manual.. It clearly shows the red wire on the ground and black on the +5 Volt. Banggood should make a Big red notification on the product site about the wrong information in the manual..! Greetings Michiel Willemse

I have received this camera module in good order but when I connected it it burned and smoked up immediately. I’ve connected it the way the manual says it should be connected. Why does the manual says that the black wire is +5 Volts and the red is ground… this is wrong.! Before I connected the camera I checked the forums and the forums confirmed the manual. So even I though it was wrong I connected it the way the manual says it should be connected. And it destroyed now… Take a good look at the picture in the manual.. It clearly shows the red wire on the ground and black on the +5 Volt. Banggood should make a Big red notification on the product site about the wrong information in the manual..! Greetings Michiel Willemse

great little device. 4.7 grams on my scale. I am using it in raceband 25 mW as higher power is not permitted in Belgium. works well. I am using eachine 5800D display I just bought. Compared to the built-in camera of the nano QX2 FPV which I bought a week ago: + TX03 deals better with light conditions changes than the nano QX2 + FOV is higher with TX03. - TX03 view is more fish eye than nano QX2 + TX03 has better antenna ( nano QX2 is just a wire) - colors of the nano QX are warmer and appear more natural

great little device. 4.7 grams on my scale. I am using it in raceband 25 mW as higher power is not permitted in Belgium. works well. I am using eachine 5800D display I just bought. Compared to the built-in camera of the nano QX2 FPV which I bought a week ago: + TX03 deals better with light conditions changes than the nano QX2 + FOV is higher with TX03. - TX03 view is more fish eye than nano QX2 + TX03 has better antenna ( nano QX2 is just a wire) - colors of the nano QX are warmer and appear more natural

great little device. 4.7 grams on my scale. I am using it in raceband 25 mW as higher power is not permitted in Belgium. works well. I am using eachine 5800D display I just bought. Compared to the built-in camera of the nano QX2 FPV which I bought a week ago: + TX03 deals better with light conditions changes than the nano QX2 + FOV is higher with TX03. - TX03 view is more fish eye than nano QX2 + TX03 has better antenna ( nano QX2 is just a wire) - colors of the nano QX are warmer and appear more natural

Frame - https://goo.gl/WGHe70 Flight conroller - https://goo.gl/PGzEuO Propeller - https://goo.gl/mn9AeE

Frame - https://goo.gl/WGHe70 Flight conroller - https://goo.gl/PGzEuO Propeller - https://goo.gl/mn9AeE

Frame - https://goo.gl/WGHe70 Flight conroller - https://goo.gl/PGzEuO Propeller - https://goo.gl/mn9AeE

Nice little cam for the E10 or H36. With it's wide angle lens it's perfect for indoors. Together with the separately sold mount it's only 5.4grams.

Nice little cam for the E10 or H36. With it's wide angle lens it's perfect for indoors. Together with the separately sold mount it's only 5.4grams.

Nice little cam for the E10 or H36. With it's wide angle lens it's perfect for indoors. Together with the separately sold mount it's only 5.4grams.

Good little unit this, with a decent picture quality/range even on the puny UK legal limit of 25mW. The rear LED display is nice and clear, stepping through power, band and channel in use. Also the button is better placed than some at the top, some are very annoying, having a button normally buried inside a normal 3D print holder., but not here. It does get quite hot in use though, so care on cooling required.

Good little unit this, with a decent picture quality/range even on the puny UK legal limit of 25mW. The rear LED display is nice and clear, stepping through power, band and channel in use. Also the button is better placed than some at the top, some are very annoying, having a button normally buried inside a normal 3D print holder., but not here. It does get quite hot in use though, so care on cooling required.

Good little unit this, with a decent picture quality/range even on the puny UK legal limit of 25mW. The rear LED display is nice and clear, stepping through power, band and channel in use. Also the button is better placed than some at the top, some are very annoying, having a button normally buried inside a normal 3D print holder., but not here. It does get quite hot in use though, so care on cooling required.

очень маленькая, легкая камера. летаю с ней на H8 3D Mini с питанием от бортовой липошки на 3,7V . хватает где то на 4 - 5 минут полета. можно менять мощность от 25mw до 200mw. сигнал стабильный. качественная картинка. рекомендую для FPV полетов как на мелко квадриках, так и на небольших самолетах. Упаковано было в картонную коробочку. Дошло как обычно, в течении месяца в московскую область. Рекомендую! классная небольшая камера

очень маленькая, легкая камера. летаю с ней на H8 3D Mini с питанием от бортовой липошки на 3,7V . хватает где то на 4 - 5 минут полета. можно менять мощность от 25mw до 200mw. сигнал стабильный. качественная картинка. рекомендую для FPV полетов как на мелко квадриках, так и на небольших самолетах. Упаковано было в картонную коробочку. Дошло как обычно, в течении месяца в московскую область. Рекомендую! классная небольшая камера

очень маленькая, легкая камера. летаю с ней на H8 3D Mini с питанием от бортовой липошки на 3,7V . хватает где то на 4 - 5 минут полета. можно менять мощность от 25mw до 200mw. сигнал стабильный. качественная картинка. рекомендую для FPV полетов как на мелко квадриках, так и на небольших самолетах. Упаковано было в картонную коробочку. Дошло как обычно, в течении месяца в московскую область. Рекомендую! классная небольшая камера

improved range and good picture quality

improved range and good picture quality

improved range and good picture quality

Good range even at 25mW and has a perfect FOV for my micro quad. Easy to use the power and channel can be changed by pressing a small button. It fits perfectly in the QX100 frame and can be fitted tightly so it dosen't move. The picture quality is also very nice, better than the standard QX90 camera and is also fine even in very dim conditions.

Good range even at 25mW and has a perfect FOV for my micro quad. Easy to use the power and channel can be changed by pressing a small button. It fits perfectly in the QX100 frame and can be fitted tightly so it dosen't move. The picture quality is also very nice, better than the standard QX90 camera and is also fine even in very dim conditions.

Good range even at 25mW and has a perfect FOV for my micro quad. Easy to use the power and channel can be changed by pressing a small button. It fits perfectly in the QX100 frame and can be fitted tightly so it dosen't move. The picture quality is also very nice, better than the standard QX90 camera and is also fine even in very dim conditions.

I used this first for my baby JJRC H36 and was awesome with no interference... Then used on my bigger glider on 200Mw and had over 1km range!

I used this first for my baby JJRC H36 and was awesome with no interference... Then used on my bigger glider on 200Mw and had over 1km range!

I used this first for my baby JJRC H36 and was awesome with no interference... Then used on my bigger glider on 200Mw and had over 1km range!

Very nice camera and transmitter aio. The quality of the image and the wide dynamic range are pretty good. I have installed it on a syma X5HW and it work very well.

Very nice camera and transmitter aio. The quality of the image and the wide dynamic range are pretty good. I have installed it on a syma X5HW and it work very well.

Very nice camera and transmitter aio. The quality of the image and the wide dynamic range are pretty good. I have installed it on a syma X5HW and it work very well.