Recensioni clienti

Scrivi una recensione
  • Tutte le recensioni (25)
  • Immagine (0)
  • Video (0)
  • Tutte le stelle
    • Tutte le stelle(25)
    • 5 Inizia(20)
    • 4 Inizia(4)
    • 3 Inizia(1)
    • 2 Inizia(0)
    • 1 Inizia(0)
Ordina per:
Recensione Top
  • Recensione Top
  • Il più utile
  • Più Recente
Recensioni solo dal tuo paese (Italy)
|
Spettacolo originale

Una parte della recensione è stata tradotta automaticamente.

  • 17/01/2018

    Si tratta di un ottimo apparecchio semploce nell'uso e piittosto intuitivo non si tratta di un oscilloscopio vero e proprio né di un semplice multimetro in effetti è tutte e due le cose insieme commitabili immediatamente alla pressione di un solo tasto. Ben costruito unico punto debole la velocità non eccelsa ma del resto il costo è realmente molto contenuto.

    Commento (1)
    Spettacolo originale
  • 22/01/2019

    The accuracy in my testing compared to a Fluke 8060A is quite good on AC, DC, capacitor and frequency ranges. The scope function works nicely at power line frequency, my main use. There is a problem with the low DC range reaching ZERO with nothing connected to the meter, a minor issue in real use. However the current version of software in my unit needs a update. In only as few minutes of testing I found the following issues with the software. I expect to find more as I use the meter. 1) The auto range function on AC volts gets "stuck" with 120V AC applied and picks a range too low for the voltage applied. This results in the wrong reading on the display. For example I apply 120V AC and the meter picks the 40V range and displays 40 volts. Should have picked 400 volt range and displayed 120V. Manual changing of the range to 400 volts results in the correct 120V value on screen. This makes auto range on the meter unusable as you never know if the right voltage is on screen. 2) When using the relative function with dB the dB value becomes incorrect. For example apply 120V AC on 400 volt range push the dB button. Meter reads 120V at 43dB Rel to 600 ohms. This is correct. Press the REL button. Voltage reads 0.0V (correct) and dB reads --- (0dB,maybe??). Reduce the voltage to 60 volts (-6dB drop in level). Meter reads -60V (correct) and 37dB (wrong should read -6dB relative change) 3) Be nice if the back-light came on when any key is pressed so the light key does not need to be pressed every time. Over all the potential for a very nice scope meter with some updating to the software. Perhaps there is away to update the meter's software in the future. That would be nice.

    Commento (1)
    Spettacolo originale
  • 30/07/2018

    ok

    Commento
    Spettacolo originale
  • 06/05/2020

    Un dispositivo molto utile per i progetti fai-da-te. Facile da gestire

    Commento
    Spettacolo originale
  • 10/10/2019

    OK.

    Commento
    Spettacolo originale
  • 16/06/2019

    All Ok

    Commento
    Spettacolo originale
  • 28/05/2019

    O aparelho é excelente e agrada logo no primeiro contato! daí você liga e simplesmente se dá 100% satisfeito com a compra em especial na função osciloscópio; tenho dois outros osciloscópios ambos Tektronix e fui comparar os valores medidos... o EONE ET310 mostrou confiavelmente os mesmos parâmetros de mediçõs. Estou totalmente satisfeito coma qualidade do aparelho incluindo as funções como multímetro. Recomendo.

    Commento
    Spettacolo originale
  • 16/05/2019

    ...

    Commento
    Spettacolo originale
  • 24/04/2019

    ótimo aparelho.

    Commento
    Spettacolo originale
  • 24/03/2019

    its good for my monitoring purpose, works as expected. thanks for good pricing

    Commento
    Spettacolo originale
Show:

    Totale 0 pagine

    Vai alla pagina

    Magari ti piace

    recommendation for you
    • US$42.99
    • US$89.99
    • US$426.99
    • US$885.99
    • US$203.99
    • US$3.99
    • US$29.99
    • US$15.99
    • US$146.99
    • US$72.99
    • US$46.99
    • US$93.49
    • US$229.99
    • US$519.99
    • US$126.99
    • US$244.99
    • US$209.99
    • US$219.99