Recensioni clienti

5 su 5
Scrivi una recensione
  • Tutte le recensioni (23)
  • Immagine (4)
  • Video (5)
  • Tutte le stelle
    • Tutte le stelle(23)
    • 5 Inizia(23)
    • 4 Inizia(0)
    • 3 Inizia(0)
    • 2 Inizia(0)
    • 1 Inizia(0)
Ordina per:
Recensione Top
  • Recensione Top
  • Il più utile
  • Più Recente
Recensioni solo dal tuo paese (Italy)
  • September-09 2020 04:15:55

    Hola buen producto, vuela genial en espacios pequeños tal como desgribe el vendedor, de buena calidad y fácil montaje, monte un motor 1806 (2400 kv) y tripala de 5x4x3 la rueda del tren de cola es cosa mía no viene en el Kit. Muchas gracias por todo un saludo

    Commento (2)
  • September-04 2020 12:24:36

    This model flies amazingly well. Its one of those weird, hidden BG gems. It does not fly mental fast, but it is extremely well behaved. Flies for about 12 minutes on a tiny 2S battery pack. Will fly slow, quite fast, is happy inverted and even rolls like a peach. 1806 2300Kv motor with a 5x5 prop is what is ideal for this one. Love mine, fly it loads at home too. Matt

    Commento (2)
  • September-25 2020 01:22:01

    arrived quickly. a bit damage to the box but everything inside look OK. cannot wait to put it together. check my unboxing video. https://youtu.be/lCfeu_Ec57E

    Commento
  • October-15 2020 17:37:10

    facile da assemblare, ottimo rapporto qualità prezzo !!!

    Commento
  • November-07 2020 13:17:05

    please you must strengthen the front b4 flying. lost orientation in the sun nose dived into ground totalled the front completely after 5 minutes on maiden , glued it back together using thin ply and off cuts from previous ft build and loads of gorilla tape and velcro strap will try it again next good weather day but it did fly nice b4 crash quick roll rate had to put a little weight in tail to get cg but will buy another if this gets too beat up ,I like it .

    Commento (1)
  • September-27 2020 10:59:56

    Simple and primitve, but from what I heard it's a nice flyer. Arrived undamaged, only the fuselage was slightly croocked, but it should be easy to fix with hot water. The manual is in Chinesee only and the photos are useless, but it's a simple enough kit to build. Should be a nice plane to fly and with that price tag you shouldn't be too concerned about stuffing it in a tree.

    Commento
  • January-02 2021 02:32:26

    This airplane is light, rugged, and flies well if built properly aligned. Mine has a DYS 1806 2300 with a 5045 prop, a 3s 500, 4x6g servos, and a small 6 channel rx, with a mass of 240g. It will climb vertically, do inside and outside loops and consecutive rolls, and will still fly slowly and easily at part throttle if you want. The landing gear mount and motor mount are strong. It taxis well, given the limitation of not having a tail wheel. The kit hardware is of good quality. My kit came with a misaligned fuselage--all the taper to the tail, seen from above, was on one side. It is important to fix this if you have this problem. Use straight edges on each side of the fuselage to see how much misalignment is present. Peel back the red sides from the rear to get to where the misalignment begins, and remove a very small wedge of material from the fuselage to allow it to bend so that the tail is centered. Glue it back together with the tail centered. The fuselage aft of the wing is also not stiff enough. Reinforce the fuselage with 0.5 mm carbon rod inset in knife slits you make in the side of the fuselage, running from below the back of the servo openings to the tail, and in the existing slit in the bottom of the fuselage. When you glue the wings to the fuselage, measure to check that the distance from the tail of the fuselage to each wingtip is the same. The cg should be on the spar. I had to add weight to the tail to get it to balance.

    Commento
  • September-21 2020 14:31:21

    I haven't flown this yet but as for the build well this thing goes together so smoothly, really easy to build.I need to buy a y lead for the aileron servo's then I can try it out, should fly really well by the look of it, nice and acrobatic with plenty of power.I can't fit a standard 2 s lipo in the body so I will be buying a NANO lipo to slip in , probably around 1000mah capacity. Alternatively I could just build a simple battery box and install it under the wing, then use my lipo's here, it seems to me the C of G taken from the wing spar requires a battery further back than inside the fuselage. Rob

    Commento
  • January-01 2021 00:50:44

    Watched a few videos about it and it seems like a good flier. Looking at the contents of the box they seem of good quality. The price of the kit is very good.

    Commento
  • October-18 2020 11:50:57

    Can i just say what a totally SUPERB LITTLE FLYER this plane does the lot but awful to build. Very simple but just yik. I used large cocktail sticks to strengthen the outer parts of the wings but it is totally superb in the air.... I fly it on 2s 500mah 25c lipos and get about 4 mins flight times

    Commento
Show:

    Total 0 pages

    Go to page

    Go

    Magari ti piace

    recommendation for you
    • 65,98€
    • 65,98€
    • 51,06€
    • 15,63€
    • 74,23€
    • 46,48€
    • 56,83€
    • 69,28€
    • 77,53€
    • 9,89€