attenuatoree fisso RF da 4,0 GHz a radiofrequenza
Una parte della recensione è stata tradotta automaticamente.
Ho testato ogni attenuazione 0 dB(di riferimento), 10 dB, 20 dB e 30 dB con il mio calibrato VNA HP 8753D (30kHz a 6GHz) e tutto era in tolleranza da 30 kHz a 4 GHz (ho fatto misura fino a 6 GHz) tranne l'attenuazione 20dB che era fuori tolleranza prevista da 3.1GHz fino a 4GHz o più. => Frequenza 3.1 GHz, S21 Guadagno -18.8 dB, Delta dB di 1.2 dB quando si prevedeva che fosse /-1.1 dB => Frequenza 4 GHz, Guadagno S21 -18.2 dB, Delta dB di 1.8 dB quando si prevedeva che fosse /-1.1 dB => Al di fuori dei 4 GHz vi sono grosse discrepanze fino a Delta dB di 6,7 dB in più rispetto alla tolleranza prevista per esempio a 5,4 GHz S21 Gain -13,3 dB => delta dB 6,7 Per ulteriori dettagli con il rapporto completo vedere: https://hydrabus.com/DC_to_4GHz_RF_Fixed_Attenuator_VNA_Tests_BVERNOUX_05May2020.pdf Per tutti i file VNA S2P vedere: https://hydrabus.com/DC_to_4GHz_RF_Fixed_Attenuator_VNA_Tests_BVERNOUX_05May2020_S2P.7z
Top quality attenuator !! Recommended !!
10dB: SWR 1:1.5 to 4G. Atten Flat, 9.56dB at 4G. At 10 GHz 11 dB. Surprisingly good ! 20dB: SWR 1:1.34 to 4G. Atten Flat 18.8 at 3.5GHz. 17dB at 6G, 15dB at 8G. 30dB: SWR 1:1.45 to 4G. Atten Flat 28.5 at 4.8G 28 at 5.4G 25dB at 7G. Pin depth fully OK ± 0.0015" on all 8 contacts. Good value for the price. All measured with professional expensive instruments. Some solder residue on the board, but easily cleaned off.
I needed to attenuate a high power signal. It worked very well.
Gute Qualität zu einem gutem Preis! Ich habe die SMA Buchsen zusätzlich mit der Unterseite der Platine verlötet, um noch besseren Halt zu garantieren, ist aber nicht unbedingt nötig. Die Impedanzen sind in einem engen Bereich (+/- 1 Ohm) um 50 Ohm.
Non ho ancora provato, ma sembra bello e ben costruito.
abbastanza buoni ...
Buona qualità ad un buon prezzo
Sembra buono.
Bella unità 0db non molto utile, 1db molto meglio.