DC 12V / 24V / 48V a CA 220V 1200W Convertitore di potenza a onda sinusoidale modificata LCD
This review will cover the 48 Volt DC /220 V AC version. Test condition: The inverter was supplied from a 7 kWh Lithium battery pack. Here is my measurements: Idle: input voltage = 49,6 V AC output = 213,5 V 500 W load: Input current = 12,5 A @ 48,9 V (611 Watts) Ouput current = 2,57 A @ 206,4 V (532 Watts) Efficiency at half load = 87 % Compared to other DC/AC inverters I have tested, I find this one far too unstable at the output voltage both in idle mode and
This review will cover the 48 Volt DC /220 V AC version. Test condition: The inverter was supplied from a 7 kWh Lithium battery pack. Here is my measurements: Idle: input voltage = 49,6 V AC output = 213,5 V 500 W load: Input current = 12,5 A @ 48,9 V (611 Watts) Ouput current = 2,57 A @ 206,4 V (532 Watts) Efficiency at half load = 87 % Compared to other DC/AC inverters I have tested, I find this one far too unstable at the output voltage both in idle mode and especially
We are using this device in our cabin for a refrigerator. Sun/Battery powered 24V. The refrigerator is working well with this system. The voltage and frequency out is is correct and it's no problem to use it for a long time. I notice also that the temperature is very low and it's not necessary for the fan to start up.
The product is good and working fine. Only negative is that the fan is running noisily even when there is no load connected. Could be corrected , possibly on the next version.
The volt display is not working properly and only showing a 12v not the 24v that it should be. Its stuck on 11.8 volts yet its connected to a 24v system.
best Product.
I purchased 2 nos one of them becomes dead symptom after 2weeks usage what is the solution and how to get recovery
Tested a basic test with using 7 watts LED light its working fine
Bought item is not good . because no work
No pure sine inverter!!!!!!!!!!!!!!! BAD!