Works flawlessly with the Geekcreit Due (product ID 906466) and the CTE TFT shield (product ID 1080423). I'm using the UTFT librairies from www.rinkydinkelectronics.com Configuration in Arduino IDE (for this screen and this shield) : UTFT myGLCD(ILI9341_16, 25, 26, 27, 28); URTouch myTouch(6, 5, 32, 3, 2); I did not try the SD card slot, but the one on the TFT screen works well. WARNING : by default, this board is configured to 5V. If your screen works only with 3.3V like me, you'll have to unsolder JP1 and JP3 and solder JP2 and JP4.

Works flawlessly with the Geekcreit Due (product ID 906466) and the CTE TFT shield (product ID 1080423). I'm using the UTFT librairies from www.rinkydinkelectronics.com Configuration in Arduino IDE (for this screen and this shield) : UTFT myGLCD(ILI9341_16, 25, 26, 27, 28); URTouch myTouch(6, 5, 32, 3, 2); I did not try the SD card slot, but the one on the TFT screen works well. WARNING : by default, this board is configured to 5V. If your screen works only with 3.3V like me, you'll have to unsolder JP1 and JP3 and solder JP2 and JP4.

Works flawlessly with the Geekcreit Due (product ID 906466) and the CTE TFT shield (product ID 1080423). I'm using the UTFT librairies from www.rinkydinkelectronics.com Configuration in Arduino IDE (for this screen and this shield) : UTFT myGLCD(ILI9341_16, 25, 26, 27, 28); URTouch myTouch(6, 5, 32, 3, 2); I did not try the SD card slot, but the one on the TFT screen works well. WARNING : by default, this board is configured to 5V. If your screen works only with 3.3V like me, you'll have to unsolder JP1 and JP3 and solder JP2 and JP4.

a perfect product with good properties. came in time, well packed, it works well

a perfect product with good properties. came in time, well packed, it works well

a perfect product with good properties. came in time, well packed, it works well

Voici pour moi ce qui fut nécessaire pour que ce shield fonctionne correctement avec une arduino DUE (banggood ID Produit 906466) et un ecran tactile (bangood ID Produit: 918609) //pour l'écran banggood avec CTE_DUE_SHIELD sur arduino DUE //décommenter "#define CTE_DUE_SHIELD 1" dans HW_ARM_defines.h dans le répertoire \hardware\arm de la librairie UTFT #include #include UTFT myGLCD(ITDB32S,25,26,27,28); URTouch myTouch( 6, 5, 32, 3, 2);

Voici pour moi ce qui fut nécessaire pour que ce shield fonctionne correctement avec une arduino DUE (banggood ID Produit 906466) et un ecran tactile (bangood ID Produit: 918609) //pour l'écran banggood avec CTE_DUE_SHIELD sur arduino DUE //décommenter "#define CTE_DUE_SHIELD 1" dans HW_ARM_defines.h dans le répertoire \hardware\arm de la librairie UTFT #include #include UTFT myGLCD(ITDB32S,25,26,27,28); URTouch myTouch( 6, 5, 32, 3, 2);

Voici pour moi ce qui fut nécessaire pour que ce shield fonctionne correctement avec une arduino DUE (banggood ID Produit 906466) et un ecran tactile (bangood ID Produit: 918609) //pour l'écran banggood avec CTE_DUE_SHIELD sur arduino DUE //décommenter "#define CTE_DUE_SHIELD 1" dans HW_ARM_defines.h dans le répertoire \hardware\arm de la librairie UTFT #include #include UTFT myGLCD(ITDB32S,25,26,27,28); URTouch myTouch( 6, 5, 32, 3, 2);

Connection manual should be part of the package. As it is for DUE , the default soldered jumpers should be for 3.3V not for 5V.

Connection manual should be part of the package. As it is for DUE , the default soldered jumpers should be for 3.3V not for 5V.

Connection manual should be part of the package. As it is for DUE , the default soldered jumpers should be for 3.3V not for 5V.

This was indeed FOR DUE. BG has wrong picture. Neverthless, it is working perfectly.

This was indeed FOR DUE. BG has wrong picture. Neverthless, it is working perfectly.

This was indeed FOR DUE. BG has wrong picture. Neverthless, it is working perfectly.

BEWARE : the board is preconfigured for 5 V (the solder jumper JP1 is soldered). Besides that all good

BEWARE : the board is preconfigured for 5 V (the solder jumper JP1 is soldered). Besides that all good

BEWARE : the board is preconfigured for 5 V (the solder jumper JP1 is soldered). Besides that all good

Roger: Già operativo; perfetto

Bien reçu. Déjà opérationnel; parfait

Roger: Già operativo; perfetto

Buona cosa. Consiglia.

Good thing. Recommend.

Buona cosa. Consiglia.

Very good, strongly recommended

Very good, strongly recommended

Very good, strongly recommended

good

good

good