CJMCU-4051 74HC4051 Modulo multiplexor analogico a 8 canali per sensori
Una parte della recensione è stata tradotta automaticamente.
This chip is ideal for connecting more than one analog input/output to the Arduino ESP8266 (which supports only one analog port). For this purpose you connect GND+VCC as usual and... Pin Z to A0 / Y0-Y7 to up to 8 analog devices / S0-S2 to 3 digital ports on the Arduino (binary switching the analog ports 0-7) / E to LOW/GND to enable Switches (see datasheet). The description lacks the supply voltage VCC which is 2V up to 10V and the data sheet which you can find at http://www.farnell.com/datasheets/1645588.pdf
Secondo aspettative, confezionato in busta idonea ai materiali elettronici
Bien, avec ça j'ai de quoi faire, conforme à la description
very good
So far so good
conforme a la description
Not tested yet, but seems of good quality
Ben confezionato e ottimi tempi di consegna (12 giorni di calendario dall'ordine). Questo modulo consente di estendere il numero di porte analogiche su un Arduino o esp utilizzando fino a 3 uscite digitali per selezionare quale degli otto ingressi analogici aggiuntivi sarà selezionato e instradato all'ingresso analogico MCU in qualsiasi momento. Sono felice di raccomandare questi articoli.
I used the circuit to mux the analog input of an ADC. I tested it at 10000 FPS and it works fine.
Last 3 i/o pins a little bit noisy(5-7). Maybe I didn't made perfect soldering.