Расширяет функционал фонаря. Подходит как для фонарей Convoy, так и для не именитых собратьев. Держит на металлической основе цепко. После модернизации фонарь нужно держать подальше от кредитных карт. It extends the functionality of the lamp. Suitable for both lamps Convoy, and for non-famous counterparts. Keeps metal-based tenacious. After upgrading the lights should be kept away from credit cards.

Расширяет функционал фонаря. Подходит как для фонарей Convoy, так и для не именитых собратьев. Держит на металлической основе цепко. После модернизации фонарь нужно держать подальше от кредитных карт. It extends the functionality of the lamp. Suitable for both lamps Convoy, and for non-famous counterparts. Keeps metal-based tenacious. After upgrading the lights should be kept away from credit cards.

Расширяет функционал фонаря. Подходит как для фонарей Convoy, так и для не именитых собратьев. Держит на металлической основе цепко. После модернизации фонарь нужно держать подальше от кредитных карт. It extends the functionality of the lamp. Suitable for both lamps Convoy, and for non-famous counterparts. Keeps metal-based tenacious. After upgrading the lights should be kept away from credit cards.

I bought this for a BLF A6 XPL torch but I needed to grind out the inside tail-cap surface with a dremel so the magnet would fit in. Other torches I’d like to use it for like Astrolux S41 and S2 have way too much material that needs to be removed (and are too heavy IMO)- see photos. Also be aware that this is really only JUST strong enough to hold an BLF A6 hanging vertically but not horizontally (eg. from a refrigerator door or similar) unless you opt for the smaller/lighter 18350 battery configuration. The magnet tends to recess into the tail-cap space by 2mm - if you glued it so it was flush with the end tail-stand surface it might hold a little better...

I bought this for a BLF A6 XPL torch but I needed to grind out the inside tail-cap surface with a dremel so the magnet would fit in. Other torches I’d like to use it for like Astrolux S41 and S2 have way too much material that needs to be removed (and are too heavy IMO)- see photos. Also be aware that this is really only JUST strong enough to hold an BLF A6 hanging vertically but not horizontally (eg. from a refrigerator door or similar) unless you opt for the smaller/lighter 18350 battery configuration. The magnet tends to recess into the tail-cap space by 2mm - if you glued it so it was flush with the end tail-stand surface it might hold a little better...

I bought this for a BLF A6 XPL torch but I needed to grind out the inside tail-cap surface with a dremel so the magnet would fit in. Other torches I’d like to use it for like Astrolux S41 and S2 have way too much material that needs to be removed (and are too heavy IMO)- see photos. Also be aware that this is really only JUST strong enough to hold an BLF A6 hanging vertically but not horizontally (eg. from a refrigerator door or similar) unless you opt for the smaller/lighter 18350 battery configuration. The magnet tends to recess into the tail-cap space by 2mm - if you glued it so it was flush with the end tail-stand surface it might hold a little better...

Ottima qualità. Mi raccomando

Отличное качество. Рекомендую

Ottima qualità. Mi raccomando

Seems to be a good quality magnetic ring, dimensions as described, but it doesn't fit into my S2's tail it is slightly larger than the groove in the flashlight.

Seems to be a good quality magnetic ring, dimensions as described, but it doesn't fit into my S2's tail it is slightly larger than the groove in the flashlight.

Seems to be a good quality magnetic ring, dimensions as described, but it doesn't fit into my S2's tail it is slightly larger than the groove in the flashlight.

Не подходит для Convoy S2+ без допилинга. Внешний диаметр кольца великоват, пришлось стачивать. Кстати, магнит слабый, на вертикальной поверхности (крыле автомобиля) съезжает вниз.

Не подходит для Convoy S2+ без допилинга. Внешний диаметр кольца великоват, пришлось стачивать. Кстати, магнит слабый, на вертикальной поверхности (крыле автомобиля) съезжает вниз.

Не подходит для Convoy S2+ без допилинга. Внешний диаметр кольца великоват, пришлось стачивать. Кстати, магнит слабый, на вертикальной поверхности (крыле автомобиля) съезжает вниз.

19 days to delivery, everything is fine, I'm happy. The magnet is a little smaller, only when you put the strap then the magnet can stand on the lamp. I'll order another magnet and a little body for another convoy bulb.

19 days to delivery, everything is fine, I'm happy. The magnet is a little smaller, only when you put the strap then the magnet can stand on the lamp. I'll order another magnet and a little body for another convoy bulb.

19 days to delivery, everything is fine, I'm happy. The magnet is a little smaller, only when you put the strap then the magnet can stand on the lamp. I'll order another magnet and a little body for another convoy bulb.

But could be stronger. These push fit in to the tail cap on my Astrolux S1 with just the right amount of grip, no glue required to hold it in place. The magnet would benefit from a power upgrade, the S1 is fine in 18300 mode but the magnet feels a little weak in 18650 mode horizontally.

But could be stronger. These push fit in to the tail cap on my Astrolux S1 with just the right amount of grip, no glue required to hold it in place. The magnet would benefit from a power upgrade, the S1 is fine in 18300 mode but the magnet feels a little weak in 18650 mode horizontally.

But could be stronger. These push fit in to the tail cap on my Astrolux S1 with just the right amount of grip, no glue required to hold it in place. The magnet would benefit from a power upgrade, the S1 is fine in 18300 mode but the magnet feels a little weak in 18650 mode horizontally.

But could be stronger. These push fit in to the tail cap on my Astrolux S1 with just the right amount of grip, no glue required to hold it in place. The magnet would benefit from a power upgrade, the S1 is fine in 18300 mode but the magnet feels a little weak in 18650 mode horizontally.

But could be stronger. These push fit in to the tail cap on my Astrolux S1 with just the right amount of grip, no glue required to hold it in place. The magnet would benefit from a power upgrade, the S1 is fine in 18300 mode but the magnet feels a little weak in 18650 mode horizontally.

But could be stronger. These push fit in to the tail cap on my Astrolux S1 with just the right amount of grip, no glue required to hold it in place. The magnet would benefit from a power upgrade, the S1 is fine in 18300 mode but the magnet feels a little weak in 18650 mode horizontally.

Красивый, как Кольцо Всевластия из Властелина Колец. Только для того, чтобы фонарь держался на вертикальной плоскости надо обязательно приклеивать.

Красивый, как Кольцо Всевластия из Властелина Колец. Только для того, чтобы фонарь держался на вертикальной плоскости надо обязательно приклеивать.

Красивый, как Кольцо Всевластия из Властелина Колец. Только для того, чтобы фонарь держался на вертикальной плоскости надо обязательно приклеивать.

Wszystko zgodne z zamówieniem. Everything is ok. Thank you.

Wszystko zgodne z zamówieniem. Everything is ok. Thank you.

Wszystko zgodne z zamówieniem. Everything is ok. Thank you.