Recensioni clienti

4.83 su 5
Scrivi una recensione
  • Tutte le recensioni (18)
  • Immagine (5)
  • Video (0)
  • Tutte le stelle
    • Tutte le stelle(18)
    • 5 Inizia(17)
    • 4 Inizia(0)
    • 3 Inizia(0)
    • 2 Inizia(1)
    • 1 Inizia(0)
Ordina per:
Recensione Top
  • Recensione Top
  • Il più utile
  • Più Recente
  • 2020-07-01 16:37:11

    Great little screen. Do you do any USB digitisers that can be used with the screen?Or know of a supplier? even if it was only an HD as opposed to dual HD which the screen is. many thanks F

  • hero_hh
    2018-06-06 17:28:55

    Yesterday I have got the board and Display. The first impression is, that the display is very sensitive, but It works very nicely. The high resolution is very impressive. To start the setup, I must use different web - pages to find the right connectivity. THE SETUP IN THE PICTURES HERE ARE INCORRECT! The cable between the HDMI2MIPI board and the connector converter board must be attached as in the attached pictures. Please improve the documentation! With documentation is this display a full 5-star

    Commento (1)
  • 2018-08-04 05:52:31

    One of the best small displays availble in the market But this one is small and had A wonderful DPI ..Best Resolution than any other available Diy for 3d printer or LCD Projectors... Note:- This Display only works With Computer not suitable for setup boxes or any other hdmi sourcesconnect it to the hdmi output Directly from your pc or form gpu then switch on your pc (Disconnect other displys if you have multi disply setup) the display will work Directly as a Standalone Display.

    Commento (2)
  • hero_hh
    2019-01-29 17:47:45

    Now got allready the second item. The first converter board died after a short cut. The complete converter board will be hot after 3 - 5 minutes running. keep this in mind if You want to add it into a box. The resolution is stil amazing.

  • 2018-10-03 00:40:49

    display working fine now. good quality display for good price.

    Commento (1)
  • 2020-08-19 01:54:06

    the back light turns on when i conect to PC but there is no image i tryed with 3 diferent PC i guess it has problem

  • 2020-09-25 14:26:41

    Cable is a bit loose (just taped in down to fix) but otherwise great.

  • 2020-09-07 04:28:32

    Works as expected, fast delivery.

  • soware
    2018-08-14 22:59:51

    The product is great, like described. For better experience, could be provide a manual or video with instructions. The board voltage is 12v, for use in 3D printer you need to remove the back. The LCD is very tiny, so take careful! I don't found the glass protector in Bangood, so I had to buy somewhere else.

    Commento (2)
  • 2018-08-04 06:22:11

    Many People Saying Connected properly But Display is Black Back light is on.For them this Display will only works with computer HDMIMostly it Will not support Any other types of HDMI sources..first remove other Connected Displays of your cpu and connect this Display only and Switch on the pc...If the disply is Not working Check it with ur Friends Computer some time Your Graffics Adaptor may not support this Display in Rare cases...Its the one of the Best and Stable Display without Any Errors...


    Go to page


    Magari ti piace

    recommendation for you
    • 12,63€
    • 9,43€
    • 8,12€
    • 9,02€
    • 4,15€
    • 4,29€
    • 11,73€
    • 5,68€
    • 103,19€
    • 15,81€
    • 222,74€
    • 21,49€
    • 16,75€
    • 14,61€
    • 343,14€
    • 171,14€
    • 20,63€
    • 6,31€