Banggood

All the sides of it look like it was torn rather than cut - looks like some one chewed on the sides of it

Bon isolant trés épais (10 mm). Prévus pour être installé sur une u20.

ολα ενταξει δεν το εβαλα ακομα για να το δοκιμασω πως λειτουργει..αυτα...

Самый обыкновенный вспененный утеплитель, что можно найти в локальных магазинах, причем дешевле. Разницы в скорости нагрева стола или какого либо влияния на качество печати не заметил, при утепления стола от фольги на утеплителе толку-ноль. Пришел сильно помятый и потрёпанный.

Articolo ben fatto...arrivato un po’ stropicciato ma per il lavoro che deve fare va bene. L’ho comprato per installarlo sotto il piatto riscaldate della mia stampante 3D e fa il suo dovere

Came a little crumpled, so actual dimensions are 29x29, but otherwise seems good quality. Took 45sec off my heating time (12v, 300x300 bed, 24-60C). Glue seems to hold up to heat.

Est arrivé tout froissé mais cela n'a pas d'impact sur la mise en place ni la qualité du produit.

but i was lucky, works well after 4 days in use

300x300x10mm Folie selbstklebende Wärmedämmung Baumwolle für 3D-Drucker beheiztes Bett

It is not 10mm but about 5 to 6mm. I have recieved it with about 2 cm oversize. Overall quality seems good and at the same level off similar insulation mats I have used before.