These are fantastic! Easy to convert to a small powered glider.I used the Redcon rx, 5 gram servo for elevator and 3.7 gram servos for ailerons. Motor is a 50 watt out runner on a 10 amp sc. 500 mah 2 cell provides a 15 min. flight.

These are fantastic! Easy to convert to a small powered glider.I used the Redcon rx, 5 gram servo for elevator and 3.7 gram servos for ailerons. Motor is a 50 watt out runner on a 10 amp sc. 500 mah 2 cell provides a 15 min. flight.

These are fantastic! Easy to convert to a small powered glider.I used the Redcon rx, 5 gram servo for elevator and 3.7 gram servos for ailerons. Motor is a 50 watt out runner on a 10 amp sc. 500 mah 2 cell provides a 15 min. flight.

The Cheetah glider is Awesome and feels lightweight and solid. I think the polihidral wing will add greatly to its stability in the air, as it gliders good and tracks straight. My conversion (2) 12g servo's (2) 5g servo's 12A Afro esc, and T-Motor 1804 14 2300kv motor. control Frshy X4R rx. already have motor mounted and plan on installing Cf rods to stiffen main wing. I dug out as much foam as i could from the cockpit area, and back under the wing. Mounted vtx under/ inside the canopy as it has plenty of room for vtx and cam. This is going to be a great glider once im done.

The Cheetah glider is Awesome and feels lightweight and solid. I think the polihidral wing will add greatly to its stability in the air, as it gliders good and tracks straight. My conversion (2) 12g servo's (2) 5g servo's 12A Afro esc, and T-Motor 1804 14 2300kv motor. control Frshy X4R rx. already have motor mounted and plan on installing Cf rods to stiffen main wing. I dug out as much foam as i could from the cockpit area, and back under the wing. Mounted vtx under/ inside the canopy as it has plenty of room for vtx and cam. This is going to be a great glider once im done.

The Cheetah glider is Awesome and feels lightweight and solid. I think the polihidral wing will add greatly to its stability in the air, as it gliders good and tracks straight. My conversion (2) 12g servo's (2) 5g servo's 12A Afro esc, and T-Motor 1804 14 2300kv motor. control Frshy X4R rx. already have motor mounted and plan on installing Cf rods to stiffen main wing. I dug out as much foam as i could from the cockpit area, and back under the wing. Mounted vtx under/ inside the canopy as it has plenty of room for vtx and cam. This is going to be a great glider once im done.

He flies great. He is beautiful. I put there: 2204 2300KV + 6040 (5040 for 3S) + ESC 2S-4S 20A + 2S900 mA / H. Servj - H301 3.7g Micro Servo sp racing f3 + INAV 2.2.1 + GPS GB 1803 FlySky FS-i6 + FS-A8C This is my favorite plane to take off and burn to the fullest https://youtu .be/h2g2rzzqdQc

He flies great. He is beautiful. I put there: 2204 2300KV + 6040 (5040 for 3S) + ESC 2S-4S 20A + 2S900 mA / H. Servj - H301 3.7g Micro Servo sp racing f3 + INAV 2.2.1 + GPS GB 1803 FlySky FS-i6 + FS-A8C This is my favorite plane to take off and burn to the fullest https://youtu .be/h2g2rzzqdQc

He flies great. He is beautiful. I put there: 2204 2300KV + 6040 (5040 for 3S) + ESC 2S-4S 20A + 2S900 mA / H. Servj - H301 3.7g Micro Servo sp racing f3 + INAV 2.2.1 + GPS GB 1803 FlySky FS-i6 + FS-A8C This is my favorite plane to take off and burn to the fullest https://youtu .be/h2g2rzzqdQc

The shipment arrived from China in the UK after 11 days and the arrival was announced by email (i.e. the service could not have been better). The box appeared as if a boxing champion had used it as a punch bag. Surprisingly, the model was in good condition. Even the two metal balls were present, although they were rolling around freely within the battered box. Do expect some warps though, but nothing lethal. The model arrived in blue, although I had ordered orange, but that is just a matter of taste. The weight of the entire foam is 85 g (i.e. the model without the 2 metal balls, which weigh in at 23 g). The free flight weight would therefore be just under 110 g. I had a first test flight in the living room (how could anyone resist?) and the model appears to be flying well.Now it is time to plan the RC conversion.Overall, I recommend this model.

The shipment arrived from China in the UK after 11 days and the arrival was announced by email (i.e. the service could not have been better). The box appeared as if a boxing champion had used it as a punch bag. Surprisingly, the model was in good condition. Even the two metal balls were present, although they were rolling around freely within the battered box. Do expect some warps though, but nothing lethal. The model arrived in blue, although I had ordered orange, but that is just a matter of taste. The weight of the entire foam is 85 g (i.e. the model without the 2 metal balls, which weigh in at 23 g). The free flight weight would therefore be just under 110 g. I had a first test flight in the living room (how could anyone resist?) and the model appears to be flying well.Now it is time to plan the RC conversion.Overall, I recommend this model.

The shipment arrived from China in the UK after 11 days and the arrival was announced by email (i.e. the service could not have been better). The box appeared as if a boxing champion had used it as a punch bag. Surprisingly, the model was in good condition. Even the two metal balls were present, although they were rolling around freely within the battered box. Do expect some warps though, but nothing lethal. The model arrived in blue, although I had ordered orange, but that is just a matter of taste. The weight of the entire foam is 85 g (i.e. the model without the 2 metal balls, which weigh in at 23 g). The free flight weight would therefore be just under 110 g. I had a first test flight in the living room (how could anyone resist?) and the model appears to be flying well.Now it is time to plan the RC conversion.Overall, I recommend this model.

Even with a correct packing, the post succeded in dammaging both parcels and corresponding planes. With some steam and glue the planes were almost as new again. Transformed one by adding servos on rudder, stabiliser, ailerons, a 4ch receiver, a 250mA 2s battery, and use it as a slope soarer. A lot of Fun!

Even with a correct packing, the post succeded in dammaging both parcels and corresponding planes. With some steam and glue the planes were almost as new again. Transformed one by adding servos on rudder, stabiliser, ailerons, a 4ch receiver, a 250mA 2s battery, and use it as a slope soarer. A lot of Fun!

Even with a correct packing, the post succeded in dammaging both parcels and corresponding planes. With some steam and glue the planes were almost as new again. Transformed one by adding servos on rudder, stabiliser, ailerons, a 4ch receiver, a 250mA 2s battery, and use it as a slope soarer. A lot of Fun!

Plane arrived in a plastic bag. Plane was in 99.9% good shape but has adent at the fuselage bottom. I can imagen other orders will arrived more damaged. A small carton box would have prevented this so BANGGOOD listen to this. Plane looks OK. Foam density is not that high and wings are not stiff. If you like to convert to RC, stiffen the wings with a carbon 5x1 mm strip vertically placed in the wing by a knife slit. Wing at the tips are curved so the 100 cm length does not carry much lift. However the wing trailing edge is nicely thinned out. Wing connection looks OK for regular use. Slingshot launching is not adviced. If you have the room glue the wing halves together. With 116 gram ready to fly as chuck glider it is ligther as for example the LIDL glider, however the wingsurface is less. The fuselage is spraypainted.Enoy this plane.I gonna convert it to RC with ailerons and stabilizer 9 gram servos. 1801 2000KV brushless motor with 6x3.5 folding prop, 10A speedcontroller and 610/2S battery.

Plane arrived in a plastic bag. Plane was in 99.9% good shape but has adent at the fuselage bottom. I can imagen other orders will arrived more damaged. A small carton box would have prevented this so BANGGOOD listen to this. Plane looks OK. Foam density is not that high and wings are not stiff. If you like to convert to RC, stiffen the wings with a carbon 5x1 mm strip vertically placed in the wing by a knife slit. Wing at the tips are curved so the 100 cm length does not carry much lift. However the wing trailing edge is nicely thinned out. Wing connection looks OK for regular use. Slingshot launching is not adviced. If you have the room glue the wing halves together. With 116 gram ready to fly as chuck glider it is ligther as for example the LIDL glider, however the wingsurface is less. The fuselage is spraypainted.Enoy this plane.I gonna convert it to RC with ailerons and stabilizer 9 gram servos. 1801 2000KV brushless motor with 6x3.5 folding prop, 10A speedcontroller and 610/2S battery.

Plane arrived in a plastic bag. Plane was in 99.9% good shape but has adent at the fuselage bottom. I can imagen other orders will arrived more damaged. A small carton box would have prevented this so BANGGOOD listen to this. Plane looks OK. Foam density is not that high and wings are not stiff. If you like to convert to RC, stiffen the wings with a carbon 5x1 mm strip vertically placed in the wing by a knife slit. Wing at the tips are curved so the 100 cm length does not carry much lift. However the wing trailing edge is nicely thinned out. Wing connection looks OK for regular use. Slingshot launching is not adviced. If you have the room glue the wing halves together. With 116 gram ready to fly as chuck glider it is ligther as for example the LIDL glider, however the wingsurface is less. The fuselage is spraypainted.Enoy this plane.I gonna convert it to RC with ailerons and stabilizer 9 gram servos. 1801 2000KV brushless motor with 6x3.5 folding prop, 10A speedcontroller and 610/2S battery.

Bene, non ci siamo ancora convertiti, ma la parte di congiunzione delle ali e'un po'debole e richiede rinforzi con stuzzicadenti e ciano.

Good. Haven't converted yet.However, the wing joining part is a little weak and requires reinforcing with toothpick and cyano.

Bene, non ci siamo ancora convertiti, ma la parte di congiunzione delle ali e'un po'debole e richiede rinforzi con stuzzicadenti e ciano.

ottimo aereo per la conversione RC.

great plane for RC conversion.

ottimo aereo per la conversione RC.

É menor do que eu pensava, mas muito bonitinho. Vou tentar transformá-lo em RC.

É menor do que eu pensava, mas muito bonitinho. Vou tentar transformá-lo em RC.

É menor do que eu pensava, mas muito bonitinho. Vou tentar transformá-lo em RC.

Non posso credere questo, iove trasformarlo in un piano rc, fibra di carbonio sotto le ali rivestimento interno in fibra di carbonio, guarda questo finora

i can't believe this ,ive turn it into a rc plane, carbon fibre under the wings carbon fibre inner lining, look at this so far

Non posso credere questo, iove trasformarlo in un piano rc, fibra di carbonio sotto le ali rivestimento interno in fibra di carbonio, guarda questo finora